Electronics Forum | Wed Feb 26 13:23:40 EST 2020 | rgduval
I haven't used these clips, or this machine, so... But..in general, I'd use as large a nozzle as you can that fits the pick area of the clip. That should give you the best opportunity at lifting the clip. If the machine has a gripper nozzle (with
Electronics Forum | Mon Mar 27 13:37:44 EDT 2023 | spoiltforchoice
I haven't run either. However when were looking at machines; MyData (MY100) was exactly the class of machine that fitted our use case. There were plenty of installations with comparable use cases to ours and plenty of those have multiple lines and ar
Electronics Forum | Wed Feb 09 10:20:26 EST 2000 | Sal
Currently we have started seeing an issue around a scuzzy connector.The problem being that during insertion of this connnector a couple of pins refused to be inserted and as a result fold over, this folding of the pin is causing the pin itself to fra
Electronics Forum | Wed Feb 09 21:45:48 EST 2000 | Dave F
Sal: Hey that customer standing around staring at you sound like fun, yeh right!!! Wolfgang makes good sense, but, in addition, I�d like to drill-down on board fabrication (har har har) a little bit (har har har) more. You say the holes are the cor
Electronics Forum | Thu Feb 10 10:49:26 EST 2000 | Sal
The connectors are well within thier specification,and are also checked for misaligned and damaged pins , as regards the cross-section results, all holes are correctly aligned and are well spaced within their tolerance of +/-0.005 (a couple of isolat
Electronics Forum | Tue Jan 02 23:39:01 EST 2001 | Stevo
John, I'm no helicopter guru but maybe someone in these links can help. Good luck-Stevo Mario of MIA Micro-Flight fame has put a very nice diagram of how to hook-up seperate components in a Piccolo board fashion on his website. If you are thinking o
Electronics Forum | Wed Nov 15 11:00:35 EST 2000 | Finepitch Services
"depending on your pad design"... To me, Wolfgang gave you the biggest secret... I guess he meant the real pad width you get on your board is the start point. Get the average measurement in mils and then cut it from the sides at the percentages he h
Electronics Forum | Tue Nov 14 05:02:39 EST 2000 | Wolfgang Busko
Hi George, you got to find the common factor for the parts that are misaligned. This double sided tape method is IMO a good one for the first shot but you have some waste in parts that should be considered. (Better skip those precious parts for the
Electronics Forum | Wed Nov 01 08:17:39 EST 2000 | Adam
we have a variety of products which we build and manufacture and build on our site, 90% of which go over the wave solder. What I would like to know is when designing a WSC how do I know what the correct angle of the aperture is in relation to the wav
Electronics Forum | Thu Sep 14 13:34:43 EDT 2000 | Boca
Of course the others have great answers, try NOT to do it, for all of their reasons. However, had to do it in the past, OEM, custom chip, die wouldn't fit in a SM package, volume wouldn't support a second package type ...... and on and on. So we us
.gif)
