Electronics Forum | Thu Mar 22 21:10:42 EST 2001 | dblsixes
Ah ha! ... You hit upon something that I discovered earlier today ... As I said in an earlier post, I was going to experiment with dog-boning the solder paste ... But upon further review, I discovered that our customer removed 75% of the pad behind t
Electronics Forum | Tue Jun 26 12:24:24 EDT 2001 | nifhail
Thanx for the reply Dave. We actually had a few thermocouples attached from underneath to see if there is any delta in temperature within the same BGA's ball. They looks OK, with the slope of 1 -2 Deg C,soak at 120 Deg C - 150 Deg C at about 90 sec,
Electronics Forum | Fri Jul 20 18:07:16 EDT 2001 | mparker
The latent contamination in sponges seems to be a minimal concern to me. Sponges will harbor more bacteria than a wet rag that is washable, but that is of greater concern in the kitchen than the rework line. Keeping a properly tinned solder tip is m
Electronics Forum | Tue Feb 08 16:09:09 EST 2000 | dean
Generally speaking with most electronic grade epoxies: 1. Cure time is a function of temperature. 2. Polymer bonds begin to quickly break down above certain temperatures (product specific). I believe aprox 170-180C. The strength of the bond de
Electronics Forum | Thu Dec 02 11:28:03 EST 1999 | Mark D. Milward
Dave F. Thanks for the info. I've spoken with Ralph and Les Hymes in the past and have taken Manko seminars before. I read something not long ago that Dr. Juran had written on the subject of Zero-defect soldering programs and was hoping for response
Electronics Forum | Thu Sep 30 12:02:20 EDT 1999 | Wolfgang Busko
| I am having problems processing immersion gold boards. The achieved solder joints appear acceptable a la IPC-A-610, but the resultant joint does not fully cover the land, i.e. you can still see an outline of gold pad. | What is the best way to achi
Electronics Forum | Wed Sep 08 14:31:48 EDT 1999 | John Thorup
| | Hello: | | We are using a Heller 1500S reflow oven to solder surface mount parts. Just within the last two weeks, the larger I.C.'s are moving while going through the oven. The parts are checked for placement before putting into the oven.
Electronics Forum | Mon Aug 30 04:08:51 EDT 1999 | Earl Moon
| | Planning to evaluate the above process... | | Can anyone can give me some tips/infos on the above.... | | e.g. stencil aperture design, aperture ratio, common problems and solutions they encountered on the above process, is the profile different
Electronics Forum | Wed Aug 18 12:35:41 EDT 1999 | Earl Moon
| | WE ARE CURRENTLY HAVING PROBLEMS REFLOWING BOARDS WITH WHITE TIN PLATING. WE ARE NOT GETTING GOOD WETTING ON THE PADS. | | WE HAVE CHECKED THE REFLOW PROFILE AND TRIED DIFFERENT PASTE'S. | | WE THINK THERE MAY BE CONTAMINATION OR OXIDATION ON THE
Electronics Forum | Wed Aug 18 21:25:37 EDT 1999 | Tony Yang
| WE ARE CURRENTLY HAVING PROBLEMS REFLOWING BOARDS WITH WHITE TIN PLATING. WE ARE NOT GETTING GOOD WETTING ON THE PADS. | WE HAVE CHECKED THE REFLOW PROFILE AND TRIED DIFFERENT PASTE'S. | WE THINK THERE MAY BE CONTAMINATION OR OXIDATION ON THE PADS.
Capital Equipment Solutions - SMT | PCBA | TEST
Equipment Dealer / Broker / Auctions
113 S Main Street
Lodi, WI USA
Phone: 6083431779
