Electronics Forum | Fri Jun 23 10:48:44 EDT 2006 | Rob
Hi Paul, Can't find any info on Cobalt 995,but we do have experience of 99/0.7/0.3 +0.02% Cobalt wire - flows better than any leadfree wire we've come across & the cobalt is supposed to improve tip life. Bit smokey though, but with extraction that'
Electronics Forum | Thu Dec 21 10:20:44 EST 2006 | Mike F
I realize this is not a board assembly question, but I'm hoping some of the people that read this forum can offer some suggestions for me to evaluate. I need a way to mark wire numbers on shrink sleeving that does not have the name Brady anywhere i
Electronics Forum | Tue Jan 09 22:04:48 EST 2007 | Guest
Set Up Guy, I am not sure if the COB you are refering to means Circuit on Board . If yes, this process also include SMT . Package is a combination of some passive components and bare die. Passives are normally attached thru SMT using solder te
Electronics Forum | Wed Jan 31 17:30:54 EST 2007 | GS
Thanks a lot flipit, I am not directly involved in this "problem" but is my friend that have his CM rejecting PCBs because it says the "+" mark (spokes lengths) are out of tolerances. It seams CM bonder's require tolerance +/- 0,05(? not sure). I d
Electronics Forum | Thu May 31 11:26:33 EDT 2007 | gsala
Tnks Patrick, additional infos..... we are just playng with different NC solder wires L-F, the best results in terms of solderability (faster solder flowing, holes filling up) it seams are coming from an ROM1, as we know, according to J-STD-004, or
Electronics Forum | Mon Jun 04 18:23:41 EDT 2007 | greggc09
Patrick Q1) Is the test pattern similar to the IPC-B-25? A1) - No - Tests were run on a prototype assembly. Q2) what is the temperature in the test chamber and voltage supplied to the test coupons? A2) 25C with 3.3VDC. Q3) Does this test i
Electronics Forum | Thu Oct 11 14:56:27 EDT 2007 | chef
Thank you- my point exactly and it starts in SMT- operators pulling the wrong paste from the fridge, touch up using the wrong solder wire, etc. My solution- GET THE LEAD OUT!!!!! I'm a CM- high mix, low to medium volumes. No steady all day every day
Electronics Forum | Thu May 01 23:46:55 EDT 2008 | lellis
Revealing trade secrets to achieve what a company can do to make money is a "touchy" situation. Especially on a forum where people are asking for help. Our company has the capability to remove your markings, and reapply them in several techniques.
Electronics Forum | Wed Dec 24 15:28:17 EST 2008 | edmentzer
We use SN100C for wave soldering and hand Lead free soldering and have had very good results. The wire cored solder for hand soldering flows good and makes very good solder joints. The SN100C in the wave solder machine also works very good. We use
Electronics Forum | Mon Jan 16 00:47:47 EST 2012 | ngineer
I have two new quad feeder bases and feeders (my machine came with none to start, and I can't find any electrical information on them. I have 4 pins at the each end (total of 4 connectors. And are in a 4 pin connector which looks identical to a sta