Electronics Forum | Wed May 22 10:27:33 EDT 2002 | stefwitt
Fiducial recognition on the Siemens machine works like the Mydata. Once you select this option, fiducials will be recognized when a new program is send. You can also select recognition as part of the feeder refill function mode. There is no automatic
Electronics Forum | Wed May 22 15:56:43 EDT 2002 | stefwitt
The play of the tape is quite significant as I mentioned in an earlier thread. Tape width can vary between 8.1 +/- 0.2mm. Demos on 0201's are most likely done with 8.1 +/- 0.05mm tape. I guess you are referring to the cover tape pull, which can dispo
Electronics Forum | Wed May 22 17:16:11 EDT 2002 | russ
We currently have two samsung CP20 CVs unfortunately I have no experience with the MyDatas The Samsungs are pretty good machines, They seem to be pretty solid all around but have experienced placement problems with 216 pin 16mil pitch QFP. The soft
Electronics Forum | Thu May 23 03:10:43 EDT 2002 | ianchan
Hi mates, need your advise here. we have solderballs on a model due to neglect by stubborn folks to follow issued process control instructions. the post-reflow PCBA has solderballs stuck in the NC flux residue and is not in compliance to IPC-A-610
Electronics Forum | Thu May 23 11:23:47 EDT 2002 | yngwie
Hi guys... Has anybody hv an experience with using a common or standard profile to reflow high mix brd ( say, low, medium and high )?. The reason for asking is that, we are running high mix low volume, and materials that were consigned is exactly as
Electronics Forum | Thu May 23 13:00:51 EDT 2002 | cyber_wolf
One more thing I want to add. Don't turn this into some big deal. Its not atom splitting, or black majic.Bottom line is that you are going to be doing some experiments to prove it to yourself and whomever else requires the data. Profiling is time con
Electronics Forum | Mon May 27 11:57:37 EDT 2002 | arcandspark
One thing you should do is characterize your reflow oven, run profile boards of various densities, say 2 gm/sq.in. to 10 gm/sq.in. Adjust the oven settings for these various boards to acheive your standard profile based on your solder paste manufactu
Electronics Forum | Mon May 27 18:51:17 EDT 2002 | harotec
Hi Yngwie Have you got a reflow oven yet. If not, forget about complicated profiling with test runs or reflow trackers. We've got a nice oven with integrated temperature-feedback system. You build any profile you want and the oven will adjust its hea
Electronics Forum | Tue May 28 00:06:08 EDT 2002 | caldon
IMO: Sanyo and Universal? maybe, maybe not would not make sense currently. UIC production is on a "reduced" schedule. To be introducing a new machine in manufacturing in these time would not be wise but who knows crazier things have happened. Conce
Electronics Forum | Fri May 31 17:52:49 EDT 2002 | fastek
I'm seeing a definate pick up of activity levels in my business. Equipment is finally selling albeit at depressed prices. Unlike last year however when things were not selling AT ANY price. At least there are buyers now. The huge CM's will take a l
