Electronics Forum | Wed Apr 13 04:09:15 EDT 2005 | simmcircuits
Hi, I need help with our MPM UP2000, the stencil and the lamp boards won't turn off completely, they are both on at the same time. Turning it on would only make it brighter, turning it off will just lose the brightness but the lamps are still on. I h
Electronics Forum | Thu Apr 14 18:28:20 EDT 2005 | darby
We use the standard supports that come with the machine. Print a 1:1 transparency of the first pass side of the pcb including mechanical outline and components. Your customer may need to supply this. Flip this over and tape it into position at th
Electronics Forum | Fri Apr 15 10:47:09 EDT 2005 | patrickbruneel
Dhanish, If I understand correct your ICT doesn't detect shorts and only measures capacitive and resistive values. The webbing as Ken mentioned would have a resistance because this is caused by a lack of flux and the web is mainly tin oxide, which w
Electronics Forum | Fri Apr 15 14:06:24 EDT 2005 | saragorcos
Shean made some good points and offered some good starting resources. Adding to what he said, I would also mention that many times, even a no-clean flux can cause contamination that requires cleaning. Our lab has dealt with numerous cases of client
Electronics Forum | Tue Apr 26 17:28:29 EDT 2005 | davef
Not sure. Try: * ScanCAD International; P.O. Box 598, 19181 Highway 8, Morrison, CO 80465-0598; 303-697-8888 F 303-697-8580 info@scancad.com http://www.scancad.com * Artwork Conversion Software; 417 Ingalls St., Santa Cruz, CA 95060; 831-426-6163 F
Electronics Forum | Fri Apr 15 08:23:14 EDT 2005 | cyber_wolf
We are seeing more and more jobs come in with matrix tray parts for our mydata machines. The problem is that the largest Y wagon will only hold 3 or less trays. We have some jobs that have 10+ trays. Currently our operators cut the trays down to sma
Electronics Forum | Thu Apr 28 08:04:45 EDT 2005 | stepheniii
I like Mydata, Fuji, and Panasonic equipment. However if you have one, I"m not a fan of mixing. I have worked with the IP3 with MTU. I found it a good solid machine. The only thing at that time was the programing. I believe they have changed thi
Electronics Forum | Thu Apr 28 16:12:30 EDT 2005 | stepheniii
I was going to say something about being carefull to not replace part trays with full trays and to make sure where the pickup location curently is. I think we had a tray of parts drop, then there were restrictions on who could load trays. When I work
Electronics Forum | Mon Apr 18 12:28:33 EDT 2005 | davef
We've never heard of it either. Stained glass widow people use varous types of copper and brass tape / foil in their work. A widely used suppler of this tape is Venture [ http://www.venturetape.com ]. They may be able to help. We're not sure how
Electronics Forum | Thu Apr 21 04:16:17 EDT 2005 | Infinity
Dear all, I am doing some small business selling solder paste, chip capacitors and resistors in China. I am going to expand the existing SMT product line. Can you experts throw in some ideas? For example, what other products would you all think of