Electronics Forum | Wed Jan 27 13:00:35 EST 2010 | randyw
Thank you for your quick responce. First let me say that I have read your articals and found them to be very comprensive and informative. Good Work Patrick My direct expereince with regard to water soluable flux is neglagable at best. In discusion w
Electronics Forum | Wed Feb 03 15:50:00 EST 2010 | boardhouse
jamboy, sounds like their have been some quality and personal changes since C-tec was purchased by DDI. I would look at having this board quoted at TTM in Chippewa falls,WI. I have no affiliation with TTM, other than I know that they are able to
Electronics Forum | Fri Jan 29 13:31:19 EST 2010 | phase1
We aquired this reflow oven some time ago and finally have the need for it. Anyone who knows how to set up this machine and train an individual would be greatly appreciated. We are located in the Rockville Maryland Area. Power is run to the machine,
Electronics Forum | Fri Jan 29 18:52:53 EST 2010 | cusackmusic
We bought an Ersa Hotflow 5 used a few years ago as a backup. Well, we needed a backup a few days ago, and it didn't back us up. When I turned it on, the screen on the machine is blank, and two buttons with an up and down arrow seem to turn on two
Electronics Forum | Fri Feb 05 14:39:50 EST 2010 | gregcr
Hi All, We evaluated and approved KESTER R520A for our default RoHS solder paste a couple years back. It's time to re-evaluate to see if this material is still the best choice. Please let me know your opinion on the solder paste you are using, and
Electronics Forum | Fri Feb 26 14:36:58 EST 2010 | gregp
Hi Dave, The short answer is "it doesn't". The mascot is simply a light guided assembly system. The major difference is the CS-400E machine has the fully programmable cut and clinch unit doing it's thing under the board while it is being assembled.
Electronics Forum | Fri Feb 12 12:19:28 EST 2010 | rodrigo
What do you mean by "check if F4G is connecting to CC...". The CC DOS windows shows up when I login the PC so does the remote shell daemon. The CC DOS windows says a bunch of stuff does has been woken. I didn't install the FTP stuff. I didn't think I
Electronics Forum | Thu Apr 01 03:44:31 EDT 2010 | nico67640
Good Morning Nicolas, > > Per J-STD-033B, 5.3.3.2 > states that a Dry cabintet maintained at not > greater than 5% RH may be considered MBB > storage. > > Hope this helps > > Chris Thanks Chris for your answer. I'm ok with you about the per
Electronics Forum | Fri Apr 02 12:41:12 EDT 2010 | CL
Nicolas, 4.1.2.1 and 4.1.2.2 mention the requirements for drying an MSD to resett the clock life. 4.1.2.2 states that once a component is dried, refer to 5.3 for safe storage. Under that specification is 5.3.3.2 DRY Cabinet at 5% RH- This states tha
Electronics Forum | Fri Feb 19 12:58:33 EST 2010 | patrickbruneel
Loco, If after reading these articles you still don’t believe Toyota went lead free let me know. Toyota developed their own lead free alloy http://sciencelinks.jp/j-east/article/200016/000020001600A0589899.php Quote” Several engineers are readyin
.gif)
