Electronics Forum | Thu Jun 28 17:05:46 EDT 2012 | davef
Here’s what we seem to know: * There’s a problem with voiding in the solder connections of SMT capacitors * A void is an open area caused by air or process fluid that is trapped within a solder connection * Voids are an allowable condition as long as
Electronics Forum | Thu Jun 28 15:22:59 EDT 2012 | spitkis2
Would like to ask end users or those with experience using infra red rework equipment (specifically when the top heater is IR) the following: 1. Can you successfully rework Package On Package (PoP) type devices? With heat directed through the packa
Electronics Forum | Fri Jun 29 10:56:56 EDT 2012 | jorge_quijano
Hi guys, I need your advise on this, I have a very uncommon PCB design (at least for me, I've never seen anything like this...) it is 32" x 18" x 0.062" and has 9 QFNs that are driving me crazy, I'm not able to get a good alignment, I can get a mediu
Electronics Forum | Tue Jul 03 16:15:08 EDT 2012 | kq702
Hi, when they did the reflow with the south bridge chipset they took a heat gun and went arround the chip in circles. This is what I did with the broken apple motherboard. I covered the board in tinfoil and cut out the squares arround the gpu, cpu an
Electronics Forum | Thu Jul 05 11:26:08 EDT 2012 | cobham1
I need help with how long do I need to bake out double sided PCB's that have been cleaned. The units will not be reworked but instead will be moved on to hand stuffing. I have looked in IPC CH-65B and J-STD-033C. I get information for parts if I am r
Electronics Forum | Thu Jul 12 11:56:20 EDT 2012 | hegemon
You might try to complete all your soldering within a 72 hour or less time frame. For all intents treat your board like a moisture sensitive component after you have baked and completed SMT reflow. Wash, blow dry, and go direct to stuffing and com
Electronics Forum | Thu Jul 05 20:54:27 EDT 2012 | actioncontrols
Hello: We have used our Phillips Topaz on a number of volume jobs and been very pleased. A while ago it became apparent that the vision LED's were growing dimmer as evidenced by having to adjust light intensities upward for various components in so
Electronics Forum | Mon Jul 23 08:35:33 EDT 2012 | grahamcooper22
The lower the RH in the MBB the better for all moisture sensitive devices. Maintaining less then 5% will mean no parts of between 2a-5a MSL will need drying before use. The calculation uses 10% because it is a sensible amount of desiccant to use base
Electronics Forum | Tue Jul 17 15:26:08 EDT 2012 | kruzer
Hi I use CP4, CP6, CP643, GLV and NXT, but i have a problem with CPIV, i cant use It with Director Fuji Flexa. i use snifer rs232 (rs232mon) to resolve problem and what i know: Computer send on rs232 to machine (every 1 min or something): vQN2105
Electronics Forum | Wed Jul 18 14:35:56 EDT 2012 | kruzer
I can not send or receive proper of the machine, also i cant send or recive program. on the second computer I have, "ESMT 1.0.1," there without any problem computer communicates with the machine, but this is an old program and wants to have everythin