Electronics Forum | Sat Feb 19 11:40:40 EST 2011 | ravo
Hi everybody, I am here seeking your experience and asking your help, I want to update our SMT production line as I already hace FUJI CP6 and QP242 machines beside GL2 and oven our new product including 60 components 0402 (1mm*0.5mm ) and 2 BGAs w
Electronics Forum | Sat Mar 05 22:53:47 EST 2011 | rodrigo
I don't remember seen any settings for the marker in the board options. But then again I can't remember where the board options are. I haven't turned on the machine in like a week. I haven't really checked if the marker moves when I zero the machine
Electronics Forum | Thu Feb 24 12:40:29 EST 2011 | thenrz
Hello all! Here's my issue: I've been assigned to make a programming fixture for a contract product we've been making. We're ramping up to 300+/month so it's becoming necessary to have more permanent fixtures. Usually, when programming, we have a
Electronics Forum | Wed Mar 02 08:18:18 EST 2011 | rway
You can contact IDI directly. Also try QA, they are a little cheaper in price. .050 center probes are not uncommon and should work for your application. Both may have a minimum order of 200 pieces or so. I don't know what Mouser's minimum order a
Electronics Forum | Tue Mar 01 11:19:47 EST 2011 | jeddmartens
I have no knowledge into PCB designing with surface mount components, all my experience has been with through hole components. I now have to design PCBs using surface mount parts. I have a few questions I was hoping someone could answer. Can a PCB w
Electronics Forum | Tue Mar 01 12:07:35 EST 2011 | gregcr
Hi All, We are gathering information on the environmental conditions in our facility, including the fresh air exchanges. A driving factor is any point of exhaust that goes to the outside air and the CFM that it pulls from the facility and if there
Electronics Forum | Tue Mar 01 16:39:58 EST 2011 | leppy
I have a VIOS file that we generated from an ftip file using PPS. I load that file into the AMS software to do optimization and feeder distributing. I have a few things that I need to do to every workorder that I create but they are fiddly to do
Electronics Forum | Mon Mar 07 09:15:03 EST 2011 | remullis
Reese, Thanks for the response. I agree with all of your comments, and actually we have SMT capability now. I also worked previously for a company for 20 years where we done primarily SMT and through the years phased out as much TH as possible, espe
Electronics Forum | Mon Mar 07 16:36:37 EST 2011 | remullis
I have been working on collecting data all day today. We are a OEM so our RMA and QA system is tied together. I have taken this data and broken it down by part type and individual boards. We had 264 (defects/rma returns) of that, 88 were NO Faults. O
Electronics Forum | Tue Mar 08 10:06:43 EST 2011 | kevslatvin
When we were looking for machines we were looking at some of the same brands but ended up going with Assembleon Opal XII. They have since been replaced by another model. We have been happy with them. Have not placed any BGA's but 0402's are not a pro
