Electronics Forum | Wed Mar 15 17:37:30 EST 2006 | Dan Feinberg
Greetings all, Dross has no value to the assembler. It actually degrades quality as a clean solder pot provides a more consistent process. Yes, removing dross does remove some metallic contaminates but that is overkill, like throwing away your refrig
Electronics Forum | Mon May 17 20:39:49 EDT 2004 | Ken
I disagree about the maintenance issues with tin/copper solder. All high tin content solders are hard on machines (silver or not). More dross? Controlling the back flow, front flow velocity and AVOID constant surface cleaning will reduce your dros
Electronics Forum | Fri Oct 14 11:56:49 EDT 2005 | patrickbruneel
Mika, 1.) Is there a maximum board thickness where it would be almost impossible to get a decent hole fil? Answer: The thicker the board the further the solder has to travel and the more you depend on solderability of boards and components, machine
Electronics Forum | Thu Sep 26 23:14:25 EDT 2013 | zsoden
We picked up this old (circa late 80s) Seho 1135 machine last year for next to nothing. It needed a bit of TLC to bring it back to working order but it's 99% working now. The only problem left is that we cannot get sufficient height from the delta wa
Electronics Forum | Fri Oct 14 09:58:13 EDT 2005 | patrickbruneel
Here's what I believe is happening. The main difference between the HASL boards and the gold plated boards is that HASL boards are pre-soldered. HASL boards need very little flux activity to get good hole fill and the machine settings have a wide pro
Electronics Forum | Thu Jul 12 18:21:37 EDT 2007 | arburgos
We are considering buying a new stencil washer machine. We stencil print boards with NC solder paste and in the near future Lead free solder paste. I'd like to hear your experience with this equipments and what you recommend.
Electronics Forum | Mon Aug 02 17:09:12 EDT 2021 | alexeyzb
What do you think about ZSWHPS-12S selective soldering machine? It looks like Ersa but more cheaper. Please, can you give me some advantages and disadvantages? I need facts, which i can check.
Electronics Forum | Fri Feb 18 13:07:46 EST 2005 | ASIR
I'm looking in to buying a 3-D solder inspection. Can anyone suggest which model to buy and how much it would cost?
Electronics Forum | Mon Apr 19 11:36:10 EDT 2010 | baildl632
We installed a fixed distance optical sensor above the conveyor rail and "wired it" throught he machines terminal bus to cut the pump on only when a board was present at the pot. We also installed a timer in line so the pump would only stay on long e
Electronics Forum | Sun Sep 22 06:21:31 EDT 2002 | Michael fogel
We are about to purchas a new cleaning machine for stencils & miss print and we are considering an ultrasonic one. Can someone light this point for me? What are the advantages / disadvantages of this method? How it effect the components and their sol
