Electronics Forum | Fri Feb 16 10:25:31 EST 2018 | ameenullakhan
Hi Rob, Thanks. We have very high mix low volume products. Even our stencil suppliers have problem to fix. So we are landing up getting one more stencil after checking the issue in NPI build. we are trying to add up all and have guideline. which i
Electronics Forum | Fri Mar 02 14:00:39 EST 2018 | magergar
I have a problem with my fuji machine, it was working and then this error code appear: INTL SRV creation error Error Code:12037A20 and this shows every time on boot and doesn't let me do anything. what should I check?
Electronics Forum | Fri Apr 20 03:04:24 EDT 2018 | tsvetan
We usually replace stencil when we start to get problems with the solder paste printing i.e. uneven solder paste deposit etc. Until then it doesn't matter how many years ago it's manufactured, but how many prints it passes and if the operators didn't
Electronics Forum | Mon Apr 23 11:05:36 EDT 2018 | proceng1
Does anyone have an ESE LX3 printer installed and running at their facility? I'm curious if you've had any problems, or major break-downs. I'm wondering in your experience how it handles different color solder mask. Any issues you found with the squ
Electronics Forum | Wed Apr 25 14:10:00 EDT 2018 | irc
hello, I'm learning to use the oven 1809 exl and when I try to put it on the Estop button is on all the time and allows use of the oven I read in the manual but I can not find an answer to deactivate it, could you tell me how I can disable this butto
Electronics Forum | Thu Apr 26 02:32:44 EDT 2018 | bukas
1. check both e-stop buttons are released 2. reset e-stop with blue reset button 3. open Alarms menu(there is icon) 4. acknowledge alarms(next to alarms menu icon) 5. clear alarms(next to acknowledge alarms icon) 6. go back to operating interface(thi
Electronics Forum | Sat Jul 14 06:11:37 EDT 2018 | jacobidiego
Hi. Actually i found that dek has an option to print to file the program data that will be found in an PRN file inside the Products folder. This file contains what i wanted. The problem now is that this file is not generated automatically. One must
Electronics Forum | Fri Jun 29 09:04:41 EDT 2018 | kdexter0928
Wow, its that much slower? If it were my decision we wouldn't be going from one old platform to another. As you said budget is the problem in this case. I am not sure that they want to spend the money on this let alone something newer. They would lik
Electronics Forum | Wed Jul 18 11:41:35 EDT 2018 | stephendo
I have only seen ceramic PCBs a couple of times. Make sure you run a temperature profile on a PCB. But you should do that anyway. Other than that I don't remember any other issues. I can't remember how they were panelized You might want to check into
Electronics Forum | Fri Jul 27 13:51:53 EDT 2018 | vlad_saviuk
Hi, have some question: during solder paste printing I'm faced with problems on the edge of the PCB - solder balls on gold pads. During analisys we checked everything - change squeegee preasure, different cleaning cycles, squeegee speed - no effect.
