Electronics Forum | Fri Mar 23 14:13:20 EST 2001 | mnaddra
RW, I have Screened Adhesive on to several different assemblies and have found that when it is possible I get a much better result than with a dot deposition process (The green strength was greatly improved), the biggest issue I ran in to was the pr
Electronics Forum | Tue Mar 27 15:53:13 EST 2001 | johnw
RW, I've been printing glue by stencil for a while. Like the other guy's say there are various method's and material's that you can use but then your printing paste so the ideal is for as little change as possible to the method's your already using.
Electronics Forum | Tue Mar 27 15:53:14 EST 2001 | johnw
RW, I've been printing glue by stencil for a while. Like the other guy's say there are various method's and material's that you can use but then your printing paste so the ideal is for as little change as possible to the method's your already using.
Electronics Forum | Tue Mar 27 18:58:36 EST 2001 | Mike Konrad
Hi Kerry, You are putting too much emphasis on the EPA�s �ENVIRONMENTAL TECHNOLOGY VERIFICATION STATEMENT� Consider the following EPA statement taken from the specific EPA report that you site: �� the end-user should contact his/her local, state,
Electronics Forum | Wed Mar 28 15:47:06 EST 2001 | kerryn
Mike, I see that you are from Aqueous Technologies and you sell stencil cleaners. I now understand your sensitivity to this subject. I seriously doubt that the EPA would copy you on correspondence between the EPA and another company. If they did,
Electronics Forum | Wed Mar 28 18:23:48 EST 2001 | Mike Konrad
Hi Bill, Please let me refresh your memory� On April 1, 1999, the United States Environmental Protection Agency sent you a letter based on what they called �inaccurate� statements made by SmartSonic (ironically on SMTNET.COM). EPA letter dated Apr
Electronics Forum | Wed Mar 28 20:03:33 EST 2001 | Rob Fischer
This is brutal. I think we should call a truce. Mike has very good points and his quotations from the EPA letter are fact. If there isn't a competitor of Bill's who hasn't seen this letter I'd be surprised. We could go on and on about this and th
Electronics Forum | Wed Mar 28 11:53:50 EST 2001 | Steve
Take the leap of faith my friend!! Buy the AOI and watch all of your problems disappear. Okay, so I exaggerated a bit. Let me tell you the real story. We purchased a CR Technology RTI6500 almost two years ago. We chose the CR Tech unit because it wa
Electronics Forum | Thu Mar 29 10:51:47 EST 2001 | Deon Nungaray
Hello Phil, AOI equipment has been around for a number of years. I remember evaluating a machine around 5 years ago. At this time the system was not able to learn right side up or upside down characters. Well, the newer systems have come a long way.
Electronics Forum | Thu Mar 29 15:29:11 EST 2001 | johnw
measuring Paste volume or at least paste height is an essencial part of any SMT process. You've got to control those input's.... Paste volume determines how much solder is available for your joint so theres a direct to joint reliability / PCB reliabi
