Electronics Forum | Tue Oct 11 15:21:12 EDT 2005 | Hoss
Sean, If the machines use more than the spec'd 8CFM, are not leaking and work fine otherwise, I wouldn't disqualify them on that basis alone. You may be exceeding the duty cycle rating of your compressor and not necessarily the volume. If Samsung
Electronics Forum | Fri Oct 14 10:55:07 EDT 2005 | Mika
We have a simular problem with Ni/Au; especially whith pcb thickness more than 1.8mm. Note: These boards have been through reflow process also. 1.)Is there a maximum board thickness where it would be almost impossible to get a decent hole fil? 2.)Wi
Electronics Forum | Fri Nov 04 20:25:47 EST 2005 | mika
Always happy to share information. Perhaps other viewers on this thread, can get some ideas of "how to". /Sincerely Ps. There is a so called "standard height" which the conveours/machines from different manufactories must be able to reach; without r
Electronics Forum | Thu Oct 20 12:50:11 EDT 2005 | bobl
I used to collect mine in a 50 gal drum and take them to the scrap dealer. If he classifies it as brass or copper you can get a good return. Most leads are nickel and tin plated brass. Most dealers stick a magnet on it and tell you its not worth much
Electronics Forum | Thu Oct 20 16:42:53 EDT 2005 | PWH
Does anyone know if it is possible to run 0402/0603/0805/1206's on a Samsung CP30V vision system? I'm attempting to get some life out of this machine but greatly dislike the chucking nozzles. My hope is to run rect. packages accross vision using M1
Electronics Forum | Sat Oct 22 14:42:28 EDT 2005 | bobpan
we had a special nozzle made and used the new quad 0402 feeder and the machine didnt miss a part.....but its probably best only to use 1 head to pick the parts because of the z being not 'perfect' between heads and thats where you would have problems
Electronics Forum | Mon Dec 12 14:05:45 EST 2005 | derengmao
I tried to use the Fixed Camera to inspect TSOP, however, I got either "UPPER SIDE END PIN ERROR", or "Missing Group:1". I have never had a parts getting recognized. I adjusted all parameter possible: Light, size, width, length. By using Dispaly Par
Electronics Forum | Tue Oct 25 22:54:55 EDT 2005 | KEN
sorry. re-read your post. The problem is the home sensor relative to the home pulse. You're catching the wrong home pulse. a 10mm offset sounds about right for a 360 degree error. You need 50% +/- 15 % to ensure you always zero to the same phys
Electronics Forum | Fri Nov 18 07:49:48 EST 2005 | Samir Nagheenanajar
I agree that Moonman is a pretentious wannabe in the industry. His site has no relevant information, the only humur in there is a picture of his fat finger pushing a button. Myself and my collegues here thought of making a "fake" consulting company
Electronics Forum | Mon Oct 31 09:35:59 EST 2005 | Slaine
Hi as this has a gold flash the nickle should be active an not require strong fluxes, i would suggest either your not getting enough heat into it (unlikely if your seeing dewetting). or that you have a plating problem the nickle has oxidised before