Electronics Forum | Thu Nov 10 13:55:25 EST 2005 | 1st Article
Milroy, Another thing to look at is your wave profile. Check speed and pre-heat, if flux gets burned off before reaching the wave then bridging is expected, a common way to check for speed is to time the point of first contact through the sub-merge
Electronics Forum | Wed Nov 09 08:33:32 EST 2005 | gregp
Sounds like the vision is having trouble deciphering what is the component and what is the background. The problem is what if the plating is inconsistent (sounds like it is)? In this case with front (reflective) lighting the problem may never be so
Electronics Forum | Mon Nov 14 08:57:14 EST 2005 | James
Hello, I am looking at a manual solder bath that the operator will dip the boards into. We looked at the cost of a wave machine but it is not in the budget for this year so we would like to go with the static bath method. I was hoping someone would b
Electronics Forum | Tue Nov 22 05:28:47 EST 2005 | Rob
Thanks, The supplier has sent us a number of responses, starting with it's compliant, then stating it's exempt, then telling us it should be fine. This has helped us to pursuade our customer to go to flash based memory, and hopefully solved the pro
Electronics Forum | Wed Nov 16 08:56:17 EST 2005 | mskler
Hello every one, I will be very thank full to all who are using CP6 fuji machine if they can spare some time for me & give some important information about the machine. 1.What is the actual CPH you are getting during production. 2. W
Electronics Forum | Thu Nov 17 13:19:53 EST 2005 | tommyttr
Fire them has been stated on here several times. What exactly does that solve? I am assuming you have good operators, that you are asking to run an automated inspection, then what exactly are your inspectors doing? Are the operators going to get more
Electronics Forum | Sun Nov 20 04:40:12 EST 2005 | KEN
I agree with Davef. If no evidence of gouging or pad damage exists thn I would suspect supplier issue. An easy test would be to load the hole with part and thermocouple and find out what your irons are capable of delivering. Unless you're solderin
Electronics Forum | Mon Nov 21 13:54:19 EST 2005 | JF
Many companies don't think of the importance of the maintenance in the machines. I proved to my Boss that following the proper maintenance we were able to get more out of the machines, he did not do maintenance for 2 years till I came to this place a
Electronics Forum | Tue Nov 22 10:12:13 EST 2005 | stepheniii
Have you complained yet to MuRata? You are talking about the same bluetooth module, aren't you. I hope everybody having trouble with module complains to them. I don't believe they put all the cautions and warnings about reducing the deltaT on the da
Electronics Forum | Mon Nov 21 01:10:27 EST 2005 | mskler
We are facing the problem of dry soldering in chip capacitor 0603. When we told the Vender then he just told that we are using solder paste with 62/36/2 combination & the components are lead free so there is prob. of dry soldering. While we are usin