Electronics Forum | Fri Jan 10 03:57:37 EST 2020 | jakapratama
Hello, When I calculate based on the data you gave, your stencil aperture area compared to pad area is 94.52%. Your aperture area ratio is 1.76 using 5 mils thickness foil. OK, your stencil and your paste release is not the culprit here. Your proble
Electronics Forum | Thu Jan 30 20:41:05 EST 2020 | sarason
A solution that could placed on any machine is a first check that places a component in a fixed location and then the 2 pin component is read with a meter like a HP component measuring system. Similar for transistors and FETS. IC's are probably not s
Electronics Forum | Thu Feb 13 03:54:57 EST 2020 | majdi4
we are obliged by customer specifications that there will be no glue despensing process on the production line.. also that the glue dispensing process is very complicated for this case .. we could have glue splash on top surface of pcb so that will
Electronics Forum | Wed Feb 12 14:14:42 EST 2020 | alvarez94
I am running a MYDATA MY19 machine.the problem is that the first 2 hours after turning on the machine it does not work throwing the following error: "transducers do not agree". After approximately 1 or 2 hours the machine starts working normally. T
Electronics Forum | Mon Mar 09 16:30:42 EDT 2020 | sportsradar
We have the software and our PC has been running the machine for approx 10 years. I just don't know why all of a sudden it decided to have this problem. :( Also I have the software if you think I can reinstall from the diskettes. Will check, and ag
Electronics Forum | Tue Mar 24 10:34:03 EDT 2020 | slthomas
My experience with our process is that those parameters would result in a big bridging problem. I'm working with a stencil designer at our fabricator on an asymmetrical aperture design that hopefully balances forces enough to keep the parts centered.
Electronics Forum | Thu Mar 19 18:26:30 EDT 2020 | damiendigilin
We just brought a used TP11 having some problems the computer will no longer boot as the 25VDC+ line was reporting over voltage at 31+VDC If we hit enable 25VDC+ on the power unit card it blows the 38+VDC Fuse F8.
Electronics Forum | Thu Apr 30 05:22:40 EDT 2020 | bobpan
There is a sensor that monitors the temperature of the x and y1/y2 axis on the machine. You have a possible problem with the x temp sensor. There is also a temperature board that is located in the leg area below the keyboard. I am attaching a picture
Electronics Forum | Tue May 05 15:12:29 EDT 2020 | electronicsprecis1
I have a Juki 740 that was working great until one day a motor cable broke and after this messege the emergency stop button has been pressed..." error popped up when I turned the machine on. I know the emergency stop works all the way. Does anyone ha
Electronics Forum | Tue Feb 23 02:43:37 EST 2021 | gabriel1blue
We just came out with a new problem with these machines. We had to shutdown for a a few weeks due to Covid-19 and now they have errors when we start them up. Looks like the back up batteries died and after we replaced all of them the settings are com
