Electronics Forum | Tue Apr 27 16:00:19 EDT 2010 | scottp
In a nutshell, Cp is a measure of your process variation compared to your spec limits and Cpk is measure of both variation and how well your process is centered within your spec limits. Cp = (USL-LSL)/6*sigma where USL=upper spec limit LSL=lo
Electronics Forum | Thu Mar 06 12:15:00 EST 2003 | msivigny
Hello Dave, First you must make sure your measurement system is calibrated for accuracy, repeatability and reproducibility. We perform a standard GR&R Study on our CmController system on a regular basis to ensure that the system itself is capable to
Electronics Forum | Thu Mar 19 12:13:16 EST 1998 | Justin Medernach
| Cpk's on top flight ovens (e.g., Conceptronics, Heller, Electrovert, Vitronics) vary wildly, from 1 to 2+, between different supplers. The suppliers don't seem to understand Cpk's. A supplier's rep whose oven has a Cpk of 1.0 told me: | 1. Cpk's
Electronics Forum | Thu Mar 19 12:37:15 EST 1998 | Earl Moon
| | Cpk's on top flight ovens (e.g., Conceptronics, Heller, Electrovert, Vitronics) vary wildly, from 1 to 2+, between different supplers. The suppliers don't seem to understand Cpk's. A supplier's rep whose oven has a Cpk of 1.0 told me: | | 1. C
Electronics Forum | Tue Sep 21 09:49:50 EDT 2004 | Pomponio Magnus
Has anyone ever seen the distributions that result when plotting percent voiding? (Typically a BGA will have enough balls that you can get oogles of data.) I have seen this and seem to be noticing a pattern. First, they are not all normal, so your
Electronics Forum | Fri Jul 09 09:01:18 EDT 1999 | Marc P
| | Hi! | | I'm a process engineer attempting to do a capability study on our existing convection reflow oven - Heller 1500. It was recommended by an independent consultant to do at the very least, load testing, process ready testing, and board unif
Electronics Forum | Sat Jul 10 02:47:27 EDT 1999 | Scott
| | | Hi! | | | I'm a process engineer attempting to do a capability study on our existing convection reflow oven - Heller 1500. It was recommended by an independent consultant to do at the very least, load testing, process ready testing, and board
Electronics Forum | Tue Mar 04 07:23:15 EST 2003 | msivigny
Hello ricardof, To implement Cpk studies on SMT production equipment, you will require highly accurate glass plates, glass component slugs, accurately manufactured stencils and a measurement system to perform X, Y and Theta positional deviations from
Electronics Forum | Thu Jul 02 15:23:15 EDT 1998 | Justin Medernach
| | I'm having a problem getting good reflow on gold sufaced boards. The profile looks good and I have adjusted it both hotter and colder and adjusted the various times ( soak, reflow ) to no avail. What realy gets me Is that a month ago we built som
Electronics Forum | Fri Jun 26 08:58:43 EDT 1998 | Justin Medernach
| WHAT IS THE BEST ANGLE FOR THE SQUEEGEE BLADE TO BE ANGLED AT? WE ARE USING 45 DEGREE ON OUR POLYURETHANE BLADES, AND I BELIVE WE HAVE THE OPTION OF EITHER 45 OR 60 DEGREES ON OUR METAL BLADES. WHICH OF THE TWO IS BETTER, OR SHOULD WE BE USING AN
.gif)
