Electronics Forum | Thu Jun 01 05:06:10 EDT 2006 | EC
Hi, I facing some 1005 component with poor wetting and look like not enough solder...... Is there any standard solder paste volume requirement. Appreciate all the input.
Electronics Forum | Fri Jul 21 12:04:09 EDT 2006 | CKH
Hi Folk, recently, i have faced some issue on Components Misaligned (1 pad size way). What could have cause this issue... Thks & Warmest Rdgs CKH
Electronics Forum | Thu Aug 17 15:09:24 EDT 2006 | slthomas
It sounds more expensive just at face value than better LEDs, and potentially MUCH more exensive due to failures if there is any kind of stress on that weakened connection.
Electronics Forum | Tue Dec 19 04:04:52 EST 2006 | ec
Hi, I been facing this problem in the past...... Now, I have change to printing. In the past, glue dotting is my bottom neck and need to use 2 glue dotting machine....and now, with printing proces, no more bottom neck in glue process and quality als
Electronics Forum | Sat Jan 06 02:12:36 EST 2007 | backbenchers
i have 1 customer using our reflow oven, he is facing the problem that after taking the boards from reflow oven ICs & some resistors felt down.they are using our glue dispenser also, the glue is not fixed with the component. wht will be the solution
Electronics Forum | Tue Aug 12 08:34:31 EDT 2008 | rameshr
hai, in our smt process we are facing the following problem. The Case A tantalum capacitor used in our PCB assembly - during reflow process get shifted, due to which other components nearby that also found missing. what are the causes for this proble
Electronics Forum | Tue Jan 23 10:24:48 EST 2007 | d0min0
Hello, for 1 year we are using meshed stencils and us cleaner, and suddenly we faced few stencils glued off the mesh... anyone can comment this phenomenon? is this safe? or you also had problems with such configuration regards
Electronics Forum | Mon Feb 05 12:57:35 EST 2007 | cyber_wolf
Take the nozzles out and let the indicator tip touch the metal face the nozzle pushes up into. This will tell you whether the variation is in the shaft or the nozzles. Also while your indicator is touching the holder, manually grab the shaft assy a
Electronics Forum | Thu Feb 22 19:37:48 EST 2007 | vshan
Hi All im facing an issue with my DEK. Once the middle sensor detects the board, the stopper does not able to stop the board on time. i have checked all the basic parameters. Can anyone help me rgd vshan
Electronics Forum | Fri Mar 30 23:07:13 EDT 2007 | mika
And how about the queston: http://www.smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=11592&mc=7 We face a big problem with this matter right know. /
