Electronics Forum | Fri May 04 16:19:52 EDT 2018 | solderingpro
meaning its non-eutectic. You would want to stay as close to 350°C as possible or (if a slightly off version of SAC305) target the highest melting point of your chemistry) - assuming your temp controller is properly calibrated that is. Other option
Electronics Forum | Wed May 17 10:11:12 EDT 2000 | Boca
Sounds 'on the money'. By gear up, I assume you use respirators. Wipe up any dust deposited on surfaces and dispose of the wipes as lead waste. Keep the cover firmly on the dross can when not in use. You've got it covered (pardon the pun). Do yo
Electronics Forum | Mon Mar 20 08:50:47 EST 2000 | Dave F
Scott: Pyros don't like to be heated, so soldering should be done as quickly as possible. Other tips are: * Keep pyro leads long. * Apply solder to the ends of leads. * Heatsink the lead, while soldering by holding the lead with a pair of pliers
Electronics Forum | Mon Apr 23 10:02:47 EDT 2001 | Cal
Mydata machines are great for large back planes close to 23" wide. The foot print of the Mydata machines are concerning- being a "T" design it sacrifices floor space. Also, Mydata is not considered to be in the same classification (my opinion) of equ
Electronics Forum | Fri May 11 15:37:58 EDT 2001 | davef
Wolfgang Tomorrow [Saturday] Lucy and I are getting-up at 6AM, shaking-off the effects of Jimbo's from the night before, grabbing the Leicas and fowl [inclement] weather gear to search for migrating warblers in what is forcasted to be a near-freezin
Electronics Forum | Thu Jul 12 20:48:12 EDT 2001 | davef
Hey, ya got me using IE, didn�t ya? Ya just gotta diversify cuz ya never know when a board stuffin� gig will end, do ya? And I do have a hat with a gear on it. So, all I�d have to do is change it out for a propeller!!!
Electronics Forum | Tue Jul 24 08:22:16 EDT 2001 | markhoch
We're getting geared up to start placing 0402 comps. for the first time. I'm trying to "touch all my bases" before we actually go live. I've verified our placement machine capabilities and investigated my solder paste performance in regards to 0402'
Electronics Forum | Tue Jul 24 08:22:56 EDT 2001 | markhoch
We're getting geared up to start placing 0402 comps. for the first time. I'm trying to "touch all my bases" before we actually go live. I've verified our placement machine capabilities and investigated my solder paste performance in regards to 0402'
Electronics Forum | Fri Apr 26 11:11:53 EDT 2002 | Mike Frye
I am looking for anyone who may have information on adjustable reflow pallets. Could you please provide a supplier and contact. My dilema is that during an initial NPI build the PCB's may not arrive with rail adds. I need a way to transfer this PCB t
Electronics Forum | Sat Jan 04 09:48:22 EST 2003 | Steve
Yes this is 1st generation, a large metal tube positioned horiz. with valves to wet the wiping towel all at once. We have the newer sys. on the other Ekra, motor driven gear rack and selonoid dispenser.I talked w/ their tech. and got "Oh yea,,they al