Electronics Forum | Tue Oct 05 17:37:21 EDT 2004 | mikecollier
We currently use a KIC 2000 system to profile on our oven and create our recipes. I had a customer in today reviewing our profiles, and he had concerns that we were exceeding 4 deg. c/sec. on our profiles. The process window parameters that we use
Electronics Forum | Fri Aug 15 10:18:42 EDT 2008 | jdumont
There was a discussion on this a few weeks back. Basically if you HAVE to do this because you have an older oven that you dont trust or your customers/ISO force you to do it then just do it monthly on the test board only. Doing it on the test board a
Electronics Forum | Wed Mar 23 18:22:44 EDT 2022 | glasscake
What is everyone using for reflow profile development? I currently am using a Kic 2000 which is OK but the software's guesses on profile improvement are inaccurate and its difficult to compare two profiles to each other. The 7TC also limits how many
Electronics Forum | Mon Aug 07 04:25:00 EDT 2000 | dougie
Hi Guys, Thanks for the response. To answer your questions... The compoments we are placing and experiencing trouble with are generally 1206 components. It isn't just one manufacturer either. The one part though we have most problems with though is
Electronics Forum | Fri Aug 18 12:35:11 EDT 2000 | Steve Thomas
Thanks for all your replies, folks. yes, I've read Chry's detailed description more than once (I too wish I could SEE it done rather than read about it), but even in following it I ran into problems. I was making it much more difficult on myself th
Electronics Forum | Wed Apr 19 14:07:20 EDT 2000 | Russ Cutler
Let me see if I've got this straight...rather than hook up a MOLE or a KIC profiler to each and every board (600 P/N's in my case), most people are making judgement calls based solely on how similar a board looks to another board, for which they have
Electronics Forum | Thu Sep 09 08:33:07 EDT 1999 | Dave F
| My company is looking to perform "real time" statistical process control on our current SMT operations. I have identified the critical processes for SPC but have not had much luck in finding a system(s) that can monitor the required processes for m
Electronics Forum | Tue Oct 05 20:07:12 EDT 2004 | davef
We do not know how your KIC2000 calculates slope. Here's an approach to calculating slope: * Subtract the lower temperature from the upper temperature. [Temp|upper-Temp|lower] = Temp|change * Subtract the time when the lower temperature was measured
Electronics Forum | Mon Apr 09 19:50:33 EDT 2012 | action_101
Hello, We're building some boards with 01005's and the only issue we are running into is the solder is not reflowing. It's the damnest thing, we are having no issues with the printing process or placing the components, the two areas we thought we wo
Electronics Forum | Mon Aug 14 18:24:36 EDT 2000 | Dave F
James: Here's a starting point: 1 www.wwnet.net/~rkroy/wp-inb.html 2 www.sas.com/otherprods/jmp/Home.html 3 www.micromeg.com/ 4 Boeing SQC (avail. from Boeing for $100) is a good little package for DOS machines. 5 For Windows, SPC KISS from Air Aca