Electronics Forum | Fri Jun 30 11:33:04 EDT 2000 | Walter
CAL Comp 34180 DIGITIZER Installation on MYDATA TP-11UFP Installed per set-up & installstion documents provided by CAL Comp. When trying to activate mouse get no result.
Electronics Forum | Fri Jul 11 08:24:58 EDT 2008 | ev
We are a small prototype small volume shop looking at getting more work that involves placing BGA's. What are the concerns or issues that we should be focusing on. We have an ABW 10 zone oven and a Mydata TP11-UFP with a SMT techniques stencil printe
Electronics Forum | Mon Aug 17 11:35:57 EDT 2020 | artem
Hello, I have some troubles with my MyData TP11-UFP with the precision of the placement. All the parts which are mechanically centered are slightly misaligned. Attached are some pictures of 0603 and a SOT23 part. I have made the calibration but it
Electronics Forum | Fri Oct 07 12:13:39 EDT 2005 | jbrower
My experience with MYDATA has been good. Tech support has always answered my questions promptly and steered me in the right direction when I was at an impass. All in all the tech support department is great. Just my opinion and experiences. My curr
Electronics Forum | Fri Oct 07 07:31:37 EDT 2005 | cyber_wolf
We use a program called ghost. It works. http://www.newegg.com/Product/Product.asp?Item=N82E16832108190
Electronics Forum | Mon Jan 03 09:36:02 EST 2011 | markhoch
There is a fan on the upper rear of the machine that has to be running for the machine to initialize. i suggest lifting open the top and check the operation of the cooling fans.
Electronics Forum | Mon Jan 03 09:39:34 EST 2011 | dyoungquist
We have gotten various errors that I have had to troubleshoot over the years. However, I have not seen an "Xfan not working" error. I do not know what would be causing that. Sorry.
Electronics Forum | Tue Jan 04 10:05:41 EST 2011 | ev
Checked that out but all fans are running. It seems to be a heat issue. I was able to get it going the next time I started a shift.
Electronics Forum | Tue Jan 04 14:06:58 EST 2011 | cyber_wolf
First I would confirm that both of your X-motors and transducers are working through the service menu. After that start looking at the big power booster on the back of the machine.
Electronics Forum | Thu Jan 06 13:56:46 EST 2011 | ev
Thanks for this detail. The X wagon responds as per the instructions here so I'll give the cables a good inspection.