Electronics Forum | Mon Jul 26 10:44:08 EDT 1999 | Boca
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Thu Jan 27 11:33:59 EST 2005 | russ
For what you have right now I would recommend that you use soldering iron tips that are made for component removal. until you get BGAs I wouldn't worry a whole lot about the expensive rework equipment. I would use specialty tips and a heat gun wit
Electronics Forum | Thu Jan 27 13:05:32 EST 2005 | reash
Thanks for the feedback. I'd still like to know what you guys think about Pace. Maybe we'll look into their MBT-250-SDPT Repair System (http://www.paceworldwide.com/_ShowSystemDetails.asp?ProductGroupID=2∏uctID=26 ). Or maybe even a very low-end R
Electronics Forum | Wed Dec 12 11:35:26 EST 2012 | rway
I work for an electronics manufacture. Our end product is on PCBAs. My question is related to the use of safety glasses, which I know are required when doing rework. But here is the question: We ordered side shields for prescription glasses. Wha
Electronics Forum | Fri Jan 28 09:30:07 EST 2005 | reash
Well the powers that be actually want to go with a regular rework station, for future growth. I guess they plan on using BGAs sometime in the near future. We're also planning on using a D-Pak device in this first board. So now we're looking at the
Electronics Forum | Wed Jan 26 19:03:41 EST 2005 | russ
40K most likely SRT > 40k most likely Weller Liester Hako Metcal There is a bigger list of companies that I wouldn't give the time of day to.
Electronics Forum | Fri Jul 23 13:09:48 EDT 1999 | Steve
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Thu Jan 27 06:39:59 EST 2005 | reash
For now, on this first board, we will be reworking components such as 0805 and 1210 size caps and resistors, along with SOT-23 and SC-70 size packages. We might eventually get into BGAs. This board will most likely be a double-sided board, probably
Electronics Forum | Thu Sep 07 15:24:29 EDT 2000 | Murad Kurwa
Steven, Try http://www.document-center.com/home. You will find various standards for BGAs freely-available but not for free. BTW, I have never seen a BGA underfilled. Only FC and CSPs. The standards available will explain when to.....High CTE delta
Electronics Forum | Wed Apr 28 14:41:45 EDT 1999 | Bob Willis
| | What is the current spec for sizing PCB pads for a land grid array? How about for a ball grid array? Are there industry spec's I can reference? | | | | Thanks, | | | | Frank | | | Frank, | Refer to the device manufacturers. they are going t