Electronics Forum | Tue May 06 10:14:18 EDT 2003 | k_h
A typical machine will have around 100 feeder slots. Manufacturers use the slots differently though, use 8mm feeder counts as your basis. Siemens, for example has 40 slots but you can get 2 (or 3) 8mm's per slot giving you 80+ 8mm feeders, while a Sa
Electronics Forum | Thu Aug 31 14:15:34 EDT 2023 | compit
Hello What feeder do you use for the long connector (65-80mm) - tape feeder, tray? What nozzles? We want to mount a SODIMM200 socket. I don't know whether to look on the tape or on the trays... The MG1 spec says it will mount connectors up to 100mm (
Electronics Forum | Fri May 04 08:53:48 EDT 2007 | davem
I have been working with the UIC GSM platform for 6 years now in an EMS environment. Operating, programming, configuration, and line installation. I do not work for Universal or represent them in any way. UIC is a 1st rate company with excellent and
Electronics Forum | Wed Dec 20 10:44:31 EST 2017 | bobpan
The z-rod bellows on head 2 and head 3 are slightly bent. The machine will show you this error if the runout is over 6.5 mils. This is usually caused by too much z when picking parts out of a vib or tray feeder. The machine will probably run. I ha
Electronics Forum | Thu Feb 05 08:08:46 EST 2004 | stefwitt
To my point of view, you should be aware of some issues. Manual taping machines with a foot switch for tape advancement require quite a few adjustments before you start the job, like: Tape width adjustment, component rail adjustment, pitch setting,
Electronics Forum | Sun Dec 25 18:13:33 EST 2005 | mika
Cheers for the info JAX, sounds like what I was > looking for. In the PTF You can have 2 matrix trays in the same feeder slot; one on the left side and one next to the other one; You don't need to mesaure the first pick-up location, distance from
Electronics Forum | Thu Mar 01 17:36:31 EST 2018 | spoiltforchoice
I wouldn't touch one of these Chinese machines if a reliable "no headaches" experience is what you are after. I'm sure they do OK for whatever it is they are designed for, but actual volume production not so much. As others have said, proper machines
Electronics Forum | Tue May 16 21:25:23 EDT 2000 | Dave F
Alek & Ramon: What are we talking about: * Presentation: Feeders / trays / etc * Pick-up: Nozzels / grippers / etc * Reflowing paste for PTH parts Good luck Dave F
Electronics Forum | Wed Apr 27 15:29:45 EDT 2011 | rkondner
Hi, I am an EE/Programmer with a LOT of code for converting CAD files to MyData formats. I have existing code to generate Packages, Components, Trays, Board, Tray Type and Feeder files. There are a lot of CAD file formats out there, what do you n
Electronics Forum | Sat Nov 08 00:28:25 EST 2014 | padawanlinuxero
Hello We a Mydata and put all kinda of components with the midas unit, but never had problems with ESD, and some of them are very delicate parts, perhaps like our colleague said perhaps you should look at the trays or feeders that you are using, pe
.gif)
winsouce.jpg)