Electronics Forum | Tue Aug 14 16:26:21 EDT 2007 | slthomas
So it's a C-n-C clearance issue? Could you go with the other cutnclinch unit...which ever you have, get the other one (one's right angled, one's offset at 45�)? Yeah, I know, they're not cheap. Other than that, hand place some of the SMT in chip bon
Electronics Forum | Mon Aug 20 05:53:26 EDT 2007 | erhard
Hello all, we are about to modify a Universal Radial 5 so the machine will be able to insert radial components with lead pitch 3.5mm and 5mm. The 3.5mm components are ELCOs which are getting inserted all the way to the component body so they sit fi
Electronics Forum | Tue Aug 28 11:40:03 EDT 2007 | lloyd
As in the previous reply, When the machine is powered up don't press the start button. Just wait until the software has loaded then go into Sitest (you may need to logon as SERVICE). In the gantry or head menu's you should find the nozzle configurat
Electronics Forum | Tue Sep 11 15:08:11 EDT 2007 | shrek
KRIKIES! If that wasn't a sales pitch, I don't know whut was, me lad. Optimizer is good for DoE's and process characterization, but no substitute for the artform that is wave soldering. When me lads here in Purchasing get PCB's from all over the w
Electronics Forum | Thu Sep 27 10:53:59 EDT 2007 | gregoryyork
Joris, > > Yep, very common to have those small > blow holes in lead-free alloys. We used to get > them very consistently on white-tin finished > boards, and less frequently with gold finished > boards, for what ever that is worth. > > IPC-6
Electronics Forum | Thu Sep 13 06:26:01 EDT 2007 | chrispy1963
Yeah Sr., MyData is definately proud of their parts which shows in their pricing. We use outsourced parts where ever available. Belts for Ywagon tables, conveyor drive belts, ect.... We finally got a break on the tooling though! Finally found a way
Electronics Forum | Tue Sep 04 03:10:35 EDT 2007 | chrispy1963
We've got 2 lead free lines running at present and one leaded. Our lead free pallets and stencils were both leaded before changing over. Just take care to remove any built up flux from the pallets as well as hidden leaded solder deposits prior to r
Electronics Forum | Sun Sep 09 23:28:08 EDT 2007 | grantp
Hi, We are looking for a supplier for bed of nails test jigs. We have a supplier we currently use, however they are always weeks late, so we really need someone else. Does anyone know of good suppliers? Also, does anyone know if you can get test j
Electronics Forum | Thu Sep 13 17:29:02 EDT 2007 | fnorradd
I am currently having a problem with uncut legs on one side of axial components from a universal dual head insertion machine. Initially it was thought that the anvil on one side was engaging slow so I stripped down and changed the seals in the botto
Electronics Forum | Tue Sep 18 15:15:10 EDT 2007 | jdengler
Jeff, You assume too much. Not all VCD's had clinch in sensors. Darron did not tell us what vintage this machine is so what habsfan said could be the problem. We need more information to help. Does the machine stop when it doesn't cut the lead? D
