Electronics Forum | Wed Mar 15 16:53:53 EST 2006 | Wave Master Larry
WELL I heard rumblings from the engineering dept that they wanna try this stuff here at my place of emplyment. Im not so sure about this.I've always herd that dross is part of the solder joint and part of wavesoldering.As I said before Ive done this
Electronics Forum | Tue Mar 14 04:29:38 EST 2006 | Pavel Murtishev
Good day, Probably i mixed up the model numbers. Nevertheless, my own opinion obout Marantz AOI series will always remain negative due to facts mentioned above. P.S. I suspect that you are PetroInTrade sales representative. Am I right? BR, Pavel
Electronics Forum | Wed Jan 18 16:03:08 EST 2006 | Klevesqu@vtc.edu
Hello, I am wondering where I can purchase and read up on the specs for the proper solder flux pastes for Luxeon emitters. I notice in there aplication briefs they mention 380SR-flux gel and a few others but I no clue if that is a model number or wha
Electronics Forum | Tue Jan 31 03:53:50 EST 2006 | chadnugent79
We use an alignment jig {from Fuji I believe} that checks any rotational offets from the shaft to the head. The bottom of the jig fits onto the head while the top slides around the top "what I call" the crown gear. I've had several instances where
Electronics Forum | Thu Mar 30 07:41:44 EST 2006 | cyber_wolf
I do not reccomend spraying anything into those clutches. There is a greased bearing in there that cannot run dry. Also there is a very specific way to dismantle the clutches, and it does not require a 5.5 mm wrench in any part of it. Dax, if you
Electronics Forum | Tue Jan 24 03:42:54 EST 2006 | aj
what problems are you having, does your machine software support BGA . Are you downloading the Part Data sheet with all the dimensions , pitch etc. If you want to tell me a BGA package that you are having problems with I will send you Part Data.
Electronics Forum | Thu Jan 19 16:25:03 EST 2006 | solderiron
Any metalurgists out there? I take the resistance value of a metal oxide substrate made of silver or gold or manganese. I then solder with 63/37 and the resistance changes but not dramatically. I then solder with Lead free SAC305 and the resistance c
Electronics Forum | Fri Jan 20 03:59:38 EST 2006 | PanaPro User
Is PanaPro easy to use? I heard it is a very powerful tool for Panasonic Machine. Have anyone heard of PanaPro RF CVT? Its wireless Component verification system, this is what I heard, but how does it works? Puzzled... Traceability System ? How to
Electronics Forum | Thu Mar 23 19:56:38 EST 2006 | gipos
Chriss, I was now on the ETS site. Seems that we shall resolve the problem.They offer upgrade of the touch scren monitor to a normal PC. I will send them a letter tomorrow. If we make it I will feel free to send you a nice gift. Mike
Electronics Forum | Sat Mar 25 16:28:23 EST 2006 | gipos
Chris, Thank you very much for your help.People from ETS were very kind to give us the access code. We have already exhaust control on the oven but seems like need to increase the outer fan capacity. I will let you know. Promissed to send you a nice
