Electronics Forum | Thu Apr 26 01:42:56 EDT 2007 | Haris
Hi, yes may be 3d is slow but it gives you great results as it shows the height while 2d picture shows error when the paste in your machine appears to end i.e. when it see that the pad starts to appear. I don't know which company brand you prefer but
Electronics Forum | Fri May 18 04:05:39 EDT 2007 | bartlozie
I'm looking for a SMT prototype & small series assembly machine, needs to be very accurate, no need for high speed. For assembly batch size 1 to 50 pcb's. The machine needs to be accurate and flexible, able to place chips 0402 up to BGA components.
Electronics Forum | Mon May 21 14:20:29 EDT 2007 | rons
A My-9 which will hold 96 8mm will run you $150K. That's a refurbed unit directly from Mydata with feeders (magazines) and warrenty. I know because I recently priced one out. The Tp series is much cheaper in price but you sacrifice speed if that is
Electronics Forum | Tue May 22 12:27:04 EDT 2007 | cyber_wolf
I would consider calling Kester and telling them they need to send their people out. I could not really see mesh size being an issue on anything 20mil and above. There are several other issues that can cause aperture clogging as well...: Incorrect
Electronics Forum | Thu Jun 14 01:47:23 EDT 2007 | pavel_murtishev
Good morning, Glue printing and glue dispensing processes have their pros and cons. Speed is main glue printing process �pro�. A-n-y dispenser will be slower if you replace your DEK with it. Your placement machines do not wait, right? So I wonder wh
Electronics Forum | Mon Jun 25 10:59:49 EDT 2007 | simsj
We're using the 1B73LOC conformal coating from Humiseal. We've seen some bubbling of the coating. Their tech handbook suggested reducing our oven ramp speed. Does anyone have a good profile for this? They've always pointed me to Nordson, and Nord
Electronics Forum | Tue Jun 26 08:47:09 EDT 2007 | geb
Hi we have a Universal GSM 1 flex head machine. It keeps on bringing up an "Axis Head 1 Z velocity over speed error during move absolute command". Pushing the e-stop button and then start again will allow it to continue making the panel. It happens r
Electronics Forum | Fri Jul 06 11:00:50 EDT 2007 | shrek
Krikies my friend. A good wave ogre will be able to look at a wave and tweak in a way to minimize contact length (by slowing the conveyor speed), thus improving peelback, and lower it to the bare minimum without disrupting it's backward and forward
Electronics Forum | Sat Aug 04 08:09:03 EDT 2007 | rich7799
I found the problem... the vx cable trunking was the wrong radius, so when the axis was moving at slower speeds to read pre stop position, the axis was not reading the platen correctly due to extra downward force.. Ive now replaced the trunking and
Electronics Forum | Thu Sep 06 12:12:06 EDT 2007 | mnorthey
We had a simliar problem with our MCS30, we ended up replacing the MCS30 with FLEXA from Fuji. the program was expensive but we used an off the shelf computer, (cheap). We are running 6 CP3's with the one computer at about ten times the speed. Very u