Electronics Forum | Thu Aug 13 03:41:30 EDT 2009 | robhs
At risk of raising a topic that has already been discussed at length, if that is the case then please point me in the right direction. We have a Lead-Free assembly that has BGA devices on both sides of the board. Any recommendations as to how we mig
Electronics Forum | Thu Aug 13 16:48:12 EDT 2009 | andrew_11
Hello, My company is looking at the possibility of bringing in an SPI machine. I was wondering if anybody can advise me on what I should be looking for, and questions I should be asking to evaluate different vendors. I know of two different technolo
Electronics Forum | Wed Aug 19 01:00:13 EDT 2009 | sergey2007
Hi! Thanks to everyone! Josh, I don't think it could be something wrong with the mechanics, as just one component was rotated. Anyway, we will check the mechanical parts of the oven. LarryD, thank you for the advice. But what is the physics of the
Electronics Forum | Mon Aug 24 04:46:54 EDT 2009 | joannetjy
Hi Radek, Thanks for your reply. I use this flux with manual soldering process for the product. Is this flux suitable for manual soldering? or it is only for wave soldering? I have sent the board for analysis, and the report shown that the white res
Electronics Forum | Tue Nov 17 11:53:42 EST 2009 | heba66
Hi, How are you? Do you need any help on Electronics Engineering or anything? Are you looking for some extraordinary Mechanical Engineers ? Do not worry just visit Freelancer.com . There are thousands of coders are waiting for you. They are very expe
Electronics Forum | Thu Sep 10 15:01:28 EDT 2009 | mefloump
I currently spray DOW 2620 with my PVA650 without any problems. I do not thin it but I do have a distance between the coating machine and IR oven to provide a flash off period. I notice bubbles only when the flash off time is too short and the coatin
Electronics Forum | Mon Aug 31 09:33:28 EDT 2009 | jamyboy
You can save your boms and Partminer will let you search that data along with capturing what you paid last time the time before and maybe if there are any opportunities to get the part cheaper somewhere else. Helps us keep track of the parts we have
Electronics Forum | Wed Sep 02 16:02:25 EDT 2009 | proy
Any suggestions/experience in repairing an old electrovert stainless wave solder pot? We have been running SN100C in this pot for a few years, and it developed a small leak along the weld in one corner. I am wondering of the best repair methods, an
Electronics Forum | Wed Nov 04 11:00:00 EST 2009 | tstrat
That is interesting, I have not seen that as a requirement before. From what I read if it is less than 7 wt% the corrosion resistance is pretty low, but if the value is too high it indicates that "black pad" is present from nickel corrosion. From wha
Electronics Forum | Sat Sep 05 23:15:32 EDT 2009 | prasadz
We have successfully implemented this dual Process You can use any printer that supports Board width 500mm. SMT Dual Process Maximum PCB Width should be (500-20 / 2 ) = 240mm Max (PCB width )Printer support = 500mm Top width + Bottom width
