Electronics Forum | Tue Sep 15 01:16:32 EDT 2020 | kylehunter
We have the same issue. It was present with our old 1500 and is even more present with our newer 1800EXL. For us, it seems to be related to the blowers, not the heaters. If we are in cooldown or wakeup the issue is still there with the heaters off.
Electronics Forum | Tue Oct 06 14:25:51 EDT 2020 | philc
Plenty of 0805 inductors around, up to 470mH, but nothing that is 26mH. Coilcraft do 23.5mH or 29mH - see https://www.coilcraft.com/getmedia/18dd250a-2b92-4f9a-bcee-3624995acc0f/0302cs.pdf Eaton do a 27mH 0805 - see https://www.eaton.com/content/dam
Electronics Forum | Thu Nov 26 03:59:59 EST 2020 | ravikumargv
Dear All... Greetings.... Recently My S27HM machine MC had problem and i replaced another same S27HM machine MC and updated BIOS and installed RMOS1&2 after Distribution successfully completed power off the machine and power On the machine, afte
Electronics Forum | Mon Nov 30 14:29:46 EST 2020 | kylehunter
Hi all. A recent board has shown some issues with graping and non-wetting on some 0402 capacitors. I believe we have the issue sorted. A combination of a 4 mil stencil with 2 mil reduction not giving us enough paste, and too long of a soak profile.
Electronics Forum | Tue Jan 05 13:26:13 EST 2021 | ppcbs
We are working to upgrade our BGA Rework Systems to place BGA's up to 150mm in size. We are encountering an issue that I wanted to pose to this group. When we get above 50mm in chip size, which is the field of view for the vision systems Prism, the
Electronics Forum | Fri Jan 15 14:32:12 EST 2021 | marcelorotofrance
Hey there We have a second hand (or third or fourth...) Contact 3Z-100 non functioning, received as is. I am in the process to asses its condition and try to get a diagnosis. After DOS boot, 3Z.EXE executes and in the screen it reads: "Initi
Electronics Forum | Fri Apr 09 15:52:57 EDT 2021 | daniellongo
The MPM Accuflex will unload the PCB to the conveyor when an explicit button command is given in Configure/Product transfer/FMI/Advanced/"Unload" or if there is a stretch error and the operator is given the choice to "Unload PCB",
Electronics Forum | Sun Apr 11 13:48:33 EDT 2021 | ngumado28898
Hi guys, I'm a newbie for SMT field. Currently, I'm facing a problem that there were many defects such as tombstone, missing, skewed, billboarding that happened with 1 type component (Resistor 0201) with a specific supplier X (we have many supplier b
Electronics Forum | Fri Apr 23 17:55:49 EDT 2021 | francoabelli
Hello, This is Franco Belli. I am looking for opinion/references for the brand *KAIT. We are about to purchase the KTU-350 wave soldering machine whose specs look good enough. I wanted to know if any of you worked with this company before and, even
Electronics Forum | Sat Jun 05 13:50:17 EDT 2021 | ppcbs
Try Sandflex Blocks for polishing. These will polish but not scratch the gold. See: https://www.amazon.com/Sandflex-Sanding-Block-3-Pack/dp/B000GACU1Q/ref=pd_bxgy_img_3/143-4402992-3496538?_encoding=UTF8&pd_rd_i=B000GACU1Q&pd_rd_r=7be0b73a-dd71-4bc