Electronics Forum | Wed Feb 21 21:21:10 EST 2001 | davef
Gary: It doesn't matter what you use to cure your glue. SMA adhesives are thermosets. This means they become hard on cure and this is not reversible. A couple of things go on with SMA adhesives when you heat them. * Their rheology is temperature
Electronics Forum | Tue Mar 13 13:15:59 EST 2001 | kerryn
Dear Dave and Mike, I do not normally respond to threads of the forum. However, I do enjoy reading other's comments. There is a lot of valuable information provided by both suppliers and users. You seem to be making light of Bill Schreiber's com
Electronics Forum | Tue Mar 13 14:25:14 EST 2001 | Mike Konrad
Hi Kerry, I do not wish to turn this subject in to a debate, but consider this� If every technical question posted resulted in a commercial reply (company name, model number, phone number, price, features and benefits, etc), then there would be lit
Electronics Forum | Fri Mar 02 08:52:20 EST 2001 | markkrmp
Are your voids looking like blow holes also? Is this only occurring on the solder joints of the Thru Hole components and Via's? Or does this happen on SMD pads? My experience is that we have seen this but only with some of our older PCB's which are
Electronics Forum | Fri Mar 16 12:14:11 EST 2001 | onset
ED, We have grown quite a bit in the past few years and we experienced the same dilemma you are experiencing. We decided to finally bite the bullet and get ourselves some high speed placement machines and a pretty large convection oven but you pr
Electronics Forum | Thu Mar 22 17:37:06 EST 2001 | davef
Hey!!! Watch it!!! I don�t want to get you believing too much of this stuff. But if you bought that, listen to this � some circuits are so critical with that skin effect stuff that they use silver as the top level solderability preservative. Turn
Electronics Forum | Fri Mar 23 10:26:47 EST 2001 | Andre
Your papers and technical articles are in demand for use with the SMT Express. We would like to offer our readers well-written technical articles covering issues crucial to the SMT industry. Your contributions will help you by making your name know
Electronics Forum | Thu Mar 29 18:14:19 EST 2001 | kerryn
Hi Dave, I looked into the South Coast Air Quality Management District Clean Air Solvent Certification when I was having my problems with VOCs. The problem with the SCAQMD CAS Certification is that it only certifies chemicals as they are found in t
Electronics Forum | Thu Apr 05 08:02:33 EDT 2001 | brownsj
I used to work for a company called Intelligent Reasoning Systems Incorporated. http://www.irsinc.com based in Austin Texas. They manufactured two different AOI systems depending on the component packages you wanted to inspect. The good thing about t
Electronics Forum | Tue Apr 03 17:15:34 EDT 2001 | jdtpfacreate
Ryan, It is a must that you try to get a partner in Japan that can help you market your product. Japan is not a very open marketplace. Many of the companies will only deal with other Japanese companies. I used to work at a company that was suc