Electronics Forum | Thu Jun 22 10:23:14 EDT 2006 | cuculi54986@yahoo.com
I'm no AOI expert by any means, however I spent a few minutes one time about 4 years ago working on an old CR Technology (or is it CR Technologies?) machine so I've been chosen by my company to be the "technical guy" for our AOI evaluation. We are l
Electronics Forum | Fri Jun 23 12:08:51 EDT 2006 | Frank
To say that we all do this in our spare time should be a correct statement for most, if not all, of us. I certainly don't get paid to surf the 'net and answer questions to problems at companies that I do not work at. But if I have some spare time a
Electronics Forum | Thu Jun 29 10:45:46 EDT 2006 | stepheniii
We have an ERSA Versaflow Ecoselect selective wave soldering machine. It works well except it needs nitrogen. You can't even move the table around if your nitrogen tank is empty. The spec sheet says Required degree of purity: Nitrogen liquid 5.0
Electronics Forum | Mon Jul 03 03:15:35 EDT 2006 | bvdb
Thanks in part to help from the good people in this forum we've got our 1989 Fuji IP-1 working really great! We can run for hours without missing a beat (except to replace empty reels). Although I'm careful to lubricate as per the instructions the
Electronics Forum | Tue Jul 04 08:49:32 EDT 2006 | Piet Brandsma
Dear all, I am one of the founders of a small company doing electronics design + embedded software. Currently our prototypes are using increasingly complex smd components. When we started we mostly used atmel cpus, but now we are starting to use fpg
Electronics Forum | Tue Jul 18 18:53:23 EDT 2006 | Mike F
Is it showing up after wave or reflow soldering, or after hand soldering? If the delamination or blister bridges between traces you have the potential for a short circuit between those traces. A delamination might be repairable, but in most cases i
Electronics Forum | Sun Jul 30 12:55:13 EDT 2006 | fastek
Grant- I'm not sure when it gets to the point when egos begin to over-ride productivity but at some point it does. I remember working at a large OEM builder of NIC cards back in the early 90's. We had a line manager for each line per shift, (5 line
Electronics Forum | Sun Jul 30 18:07:34 EDT 2006 | Grant
Hi, Yes, it seems the case, and it's something I am thinking about all the time. I am sure the guys who ran your company thought it was doing ok at the time, and I think it's a lot easer for things to go wrong than you imagine, but at the top it's h
Electronics Forum | Fri Jul 28 09:35:12 EDT 2006 | chrisgriffin
I think Siemens 80 S20 is a great machine. I worked on them for a few years, with very little problems. They are extremely easy to maintain. I think a complete PM took about an hour. The software is good and user friendly. You can change one over
Electronics Forum | Sat Jul 29 00:34:40 EDT 2006 | darylp
G'day from Oz, I want to teach my wife to drive the MyData TP9-2U & would like to make a PC simulator she can practice with at home to understand the concepts of operation. Using TPSys 2.2.3L software, if I try to install it on a PC as a TP9, it bau