Electronics Forum | Sun Dec 11 22:55:22 EST 2016 | ppcbs
What type of flux is in your solder paste? Active or No-Clean? With lead free solder you really should be using an active flux. The lead free oxidizes during reflow if you are not using a Nitrogen or Vapor Phase reflow. So a more robust and activ
Electronics Forum | Thu Dec 29 09:03:03 EST 2016 | sumote
I would cut a piece of cardboard to the same dimensions as your circuit card. Run that through the fluxer of your machine and pull it out before the pre-heater. Take a look at the cardboard and verify that flux has been sprayed on it. That board look
Electronics Forum | Wed Apr 26 19:58:00 EDT 2017 | methos1979
Wondering how many out there have upgraded their AOI systems to 3D technology? For those that have here are some questions I have: 1.) What system were you using previously? 2.) What systems did you evaluate in your process of selecting a new syst
Electronics Forum | Wed Jul 12 16:21:26 EDT 2017 | bk
When i considered using one I bought a cheaper brand named aoyue which cost less then $140 U.S. just to see if it would work for what we were trying. It did work but our engineering dept wound up scrapping it and doing a redesign. I was going to get
Electronics Forum | Fri Aug 11 09:23:23 EDT 2017 | emeto
kalsi, it looks like you are more comfortable with Mirae. From reading your post, you guys set the Mirae faster and better than the Advatis, so I think the answer is clear. Many discussions here mentioned that the machines are as good as your unders
Electronics Forum | Wed Oct 18 09:32:05 EDT 2017 | alexeis
Hi, Pick and Place file is included in CAD file. CAD file contains full information about a board including internal layers, silk, PAD/Component structure, and more. You can use Pick and Place (PnP) file on preparing SMT Programs. In case of small
Electronics Forum | Fri Dec 01 05:59:55 EST 2017 | sarason
When you go repairing resources like one time copies of an installed OS for a machine like yours , you have to treat it like your life depended on it. So get a copy of the harddisk before you attempt to repair it no matter which methodology you use.
Electronics Forum | Thu Jan 18 17:26:30 EST 2018 | davef
I'm aware of no electrical test for detecting voids and air bubbles. If someone was x-raying my boards and saw voids and air bubbles and they weren't happy about it, first thing I'd do is convince them that the boards a within standard. You know some
Electronics Forum | Tue Jan 23 09:47:02 EST 2018 | dleeper
I've used VJ Electronics Summit series of rework machine. I liked the programing interface. You can used canned scripts for basic removal/replacement processes or you edit/write your own if you want a customized work flow. The machines are very ope
Electronics Forum | Fri Mar 02 08:33:43 EST 2018 | dwl
40 parts per board multiplied by half a million per year is 20 million placements per year. That’s serious production. The machine is rated at 7500 placements per hour, so running 24/7 that’s 111 days per year. The rated placement rates on pick and