Electronics Forum | Fri Feb 17 16:57:33 EST 2006 | Hoss
I'm looking for an RH meter for monitoring of a component drybox. Our target is to maintain 0-1% RH. I've looked at many different units and none of them have the required accuracy. +/-2% is the best I've been able to find with units capable of me
Electronics Forum | Fri Mar 24 13:35:53 EST 2006 | bvdb
If one considers that a computer used to fill a good sized room and now can sit in/on your hand I would say that the electronics industry has already greatly reduced the use of lead. Microelectronics keeps getting smaller with fewer interconnects
Electronics Forum | Mon Aug 21 10:58:34 EDT 2006 | davef
Pulsar Solder Saver: "The Solder Saver is a unique, handheld tool that scoops dross directly from the surface of the solder wave pot. The dross oxides are instantly separated from the solder using a unique high-speed rotary process system. The newly
Electronics Forum | Tue Nov 07 10:43:25 EST 2006 | muse95
Also, have you considered the possibility that if you solder on an existing joint on a board that was built with SnPb solder, even though you are using leadfree solder wire, you would now contaminate the tip of your soldering iron. If you then start
Electronics Forum | Mon Nov 27 21:29:57 EST 2006 | davef
Chemical gold is a poorly defined [very sloppy] term that means various thing to different people [as you've demonstrated]. Commonly it is either: * ENIG: 5�m Ni, 0.1�m Au * Immersion gold "Autocatalytic chemical gold plating" - Refers to "electrol
Electronics Forum | Tue Jan 16 07:59:36 EST 2007 | tk380514
we worked out that the wave soldering cassettes Duratstone material takes alomst 35 degree away from the surface of the pcb, and the speed is already too slow it should be over 1.0 - 1.8 meters a minute but its now already 82 cm a minute, in order to
Electronics Forum | Mon Mar 05 15:56:21 EST 2007 | jasont
NM-2858 is European style M size MV2F. NM-2859 is European style XL size MV2F. MV2F is manufactured rated at 0.1sec per placement however, I have only seen them acheive around 20-25,000 cph I have x2 MV2F-XL "Q" in stock (NM-2559MB) w/feeders. IF
Electronics Forum | Fri Sep 26 12:16:52 EDT 2008 | bickt
you cannot swap 0-3 only 0-1 or 2-3 they are not the same euro cards. they function very diffrently. if you look you will see there are more chips and circuitry on one set. there are 2 w/red leds and 2 with green leds. at least thats how they soo
Electronics Forum | Thu Jun 25 07:54:02 EDT 2009 | brucow
Hi and thank you for your replies, I feel a lot more confident about tackling the job with your instructions, many thanks. We haven't seen any accuracy issues, and the ballscrew has been making the same banging/knocking noise when changing direction
Electronics Forum | Mon Apr 22 20:19:28 EDT 2013 | dman97
Thanks for the advise, but it appears that there is more to this issue than just the input/output configuration. Is there anyone in the San Francisco bay area that can help troubleshoot this machine for me? I am located in Fremont California and am