Electronics Forum | Wed Jun 03 16:26:37 EDT 2009 | wisch123
The most innovative new technology today is ccoming out of Fuji. They don't really advertise, so if you haven't gone to a show lately you might not have seen it. The machine is call the XPF-W and it sets the new standard for quality, accuracy, reliab
Electronics Forum | Tue Jan 12 08:06:43 EST 2010 | kpm135
basically the rule of thumb for the 8mm feeder is that you only want one component exposed in the pocket at a time. If you see more than one component exposed you need to go down in size. The reason for this is that if there is another component expo
Electronics Forum | Mon Jan 25 00:56:38 EST 2010 | sparrow
Hello, Mydata p&p machines are built for high mixed and low/mid volume production, so if you talk about very low volume - no doubt, mydata is what you can use. You can consider 2 models for your application - MY100SX or MY100LX, depending on the min
Electronics Forum | Wed Feb 25 10:36:50 EST 2015 | robl
As previous posters have mentioned you need to understand your product range, changeovers, number of feeders needed, critically local support, etc. I've used both and although the Europlacer feeders are nice they are also expensive. We have lot
Electronics Forum | Fri Apr 06 02:17:15 EDT 2018 | rob
@ Sr.Tech, Most of our Chinese spares are Juki & Yamaha original & still bagged, just much cheaper. They wouldn't sell machines in China if all the spares and consumables were at European mark ups. Nozzle wise the Juki 750 & 760 copies are not 100%
Electronics Forum | Mon Mar 26 02:41:01 EDT 2018 | robl
Hi Reckless, If it is an Opal Xii with the 8 nozzle conversion it is a no brainer. If it's only got 4 nozzles, then it still has the advantage of being able to place down to 01005 (the 7 series is only 0402), and should be able to handle a wider r
Electronics Forum | Wed Jun 24 10:17:50 EDT 2020 | kylehunter
> Hi. Guessing that you are operational by now? If > not, consider to use BGA definition and use the > editor to define where the bottom side pads are > or are not. Just our 2 bits input. The Assembleon > X / Yamaha units are quite
Electronics Forum | Tue Apr 13 12:56:16 EDT 2021 | robl
Hi Tonies, Do you place 0201's from any other supplier? if so, do you see similar issues on those parts? There are a lot of things that can go wrong on 0201 & 01005 that aren't the part manufacturer - part data, printing, placement, nozzle sele
Electronics Forum | Fri Jun 24 13:59:15 EDT 2022 | davef
I received the same message for the 2nd, 3rd & 4th papers and have gotten SMTnet technical people working on correcting the issue Thanks for making us aware. [davefatsmtnet.com] Effect of Nano-Coated Stencil on 01005 Printing [https://smtnet.co
Electronics Forum | Sun Oct 11 16:20:49 EDT 2020 | kumarb
Hi. My 2 bits...from your list, we have had communication with Seamark and our experience so far has been very positive. We are reviewing to purchase one of their BGA rework systems, primarily from the video on youtube showing Louis Rossman running o