Electronics Forum | Fri Oct 31 14:09:07 EDT 2014 | wbrenner
Having a problem with a DEK printer. In the back to front motion, getting poor ramdom paste volume on micro BGA pads. Other BGA 1 mm pads are fine. The front to back motion is fine. Any throufghts on this directional issue. Ran ~200 panels no pr
Electronics Forum | Tue Nov 01 12:28:36 EDT 2016 | comatose
It depends. Are you hand breaking them, rotary knife or linear knife? Hand break you want to be about 5mm (and it isn't a great practice even then) with a rotart knife you want to keep parts probably 3mm, especially capacitors. With a linear knife we
Electronics Forum | Wed Aug 29 03:16:20 EDT 2018 | cannizzaro
It is recommended that the thickness of the stencil of 0.1mm, the steel mesh should be partially nano-coated. It is best not to dry easily, and the particles are not easy to be too large. I have tried ALLPCB for this kind of BGA in the past and they
Electronics Forum | Wed Jan 09 17:42:08 EST 2019 | sarason
3 tools a straight edge that can run between 2 machines and a level. You could also use an auto level as they do make life easy. With either setup your line should end up less than 1mm t of true over a20 metre distance. sarason
Electronics Forum | Thu Oct 21 13:08:38 EDT 2021 | ademrah
Hi, It depends on smallest pitch size of your components. For the 0.3 um, 0.5 um, etc. sizes could be mentioned on Clean Room. For example; for ISO-7 standart (Class 10,000) higher than 5um is not acceptable, however 1mm can acceptable to describ
Electronics Forum | Wed Jun 02 20:15:03 EDT 2021 | jamesatqkits
Hello wonderful people. Does anyone know if I can get away with a 1mm fiducial on a Samsung CP45, I know the manual states the beam is .6mm and Fid's should be 2mm. Anyone have experience with this? Thanks, James in Canada have a great day everyone.
Electronics Forum | Fri May 13 22:24:47 EDT 2022 | glasscake
Try adding blow after mount before head up if your machine lets you. Make sure your placing the part into the solder paste as that will add some holding force as well. If your tips are spring loaded you can do some 0.5mm additional mounting height.
Electronics Forum | Fri Sep 22 08:22:17 EDT 2023 | linux
Hello All, This would be a question for someone with experience in PCB design, Intrusive reflow Narrow profile connector(Electrode Rectangular) L=1mm X W=0.9mm. What shape and size hole is required in the PCB to ensure sufficient solderability and re
Electronics Forum | Fri Jun 18 11:31:17 EDT 2004 | gregp
I think it depends on the thickness of the PORON sheet. For .3mm balls you could probably get away with a pretty thin sheet (maybe 1/16"). I don't know how thin it comes offhand. For the part you are describing I woulf try maybe a 3.5mm OD and a 1
Electronics Forum | Thu Jun 03 06:14:38 EDT 2021 | bukas
Yes, most of my fiducials are 1 mm. BUT, you may consider going 1.5mm or even better 2 mm because in my experience PCB manufacturers will NOT check fiducial shape during PCB testing. This goes for fiducials that are placed on panel frame. Fiducilas t
winsouce.jpg)
