Electronics Forum | Fri Jun 02 06:22:47 EDT 2023 | calebcsmt
We have been using our Pillarhouse Handex Selective for just over a year now. We are finding the nozzles are lasting approx. 3-5 months with w/ SAC305 @ 305C. Generally don't have any issues with wetting and with good maintenance, proper use of th
Electronics Forum | Wed Feb 22 03:29:09 EST 2017 | niki
Which is the best way to clean the PCB after > soldering? Is it good enough with IPA > (isopropyl) or with the Flux Remover > spray? However, we use a lead free solder wire > (3,5% flux inside the core) and after the > soldering its a visible we
Electronics Forum | Sat Nov 04 20:17:25 EST 2000 | Greg G
Hi Guys, I'm sorry to ask you this, but I got mixed infos from the archive. I want to define a process in wave soldering regarding bd-wave interaction. Now "What's the required dwell Time of a lead in the solder bath?" Some says 3-5 secs is good, som
Electronics Forum | Sun May 09 09:23:27 EDT 2004 | Sam
Harry, Yes, the model is AP-20 and the computer is 386. I think the system disk was damaged by floppy driver that did not do the maintenance before reading the disk. I have do the test with the common disk that insert to the driver after do maintena
Electronics Forum | Wed Aug 04 14:56:05 EDT 1999 | Brian
We are installing a new reflow oven and I have been told that we do not need to vent the exhaust out through the roof since we have a false ceiling. All that is required is to vent above the false ceiling and that the air exchange is great enough tha
Electronics Forum | Thu Sep 28 16:17:01 EDT 2000 | C.K.
We've got a new machine here called the "Automated Voice-Activated Printed Circuit Board Assembly Center." Basically, the way it works is you upload all of the information to this machine (your BOM, CAD Data etc.), and then after it's programmed, yo
Electronics Forum | Fri Sep 29 11:01:20 EDT 2000 | C.K.
We've got a new machine here called the "Automated Voice-Activated Printed Circuit Board Assembly Center." Basically, the way it works is you upload all of the information to this machine (your BOM, CAD Data, type of solder, etc.), and then after it
Electronics Forum | Mon May 29 02:24:32 EDT 2000 | Dreamsniper
Hi Guys, Has anyone of you ever tried a GSM1 Multi Pitch Feeders with a GSM1 UPS Version 1.3.5 ? I've Inquired with Universal guys and they said that they have not tried this feeders with this old software rev but they said that there shouldn't be a
Electronics Forum | Fri Jan 26 08:28:59 EST 2001 | Sal
I am currently in the Process of setting up some SPC software on our Wavesoldering equipment. What I would like to know for each Parameter that is listed below what kind of variation from my average setpoint would cause defects.Example. If the averag
Electronics Forum | Wed Mar 14 09:07:34 EST 2001 | blnorman
We just ran a study to try to determine this. We exposed the paste to 85% humidity to simulate worst case manufacturing. At various times we removed the paste from the chamber and tested it for tack, solder balling, wetting (copper coupon), and vis
.gif)
