Electronics Forum | Sat Aug 19 22:54:12 EDT 2023 | sonavc
Hi The machine run fine. Now I had the problem ZL or ZR driver Alarm. Turn on machine, everything is checked O.K I can be able to home the machine. When just start auto, the assembly or semi -auto. The machine is stopped, and show driver alarm ZL or
Electronics Forum | Mon Apr 15 20:03:59 EDT 2002 | Jones
They work great as long as your conveyor speed has been calibrated and checked on some type of PM schedule. On some oven types these sensors can warn you to possible problems with the conveyor speed. Say the oven is calculating that the board is movi
Electronics Forum | Thu Feb 14 21:52:56 EST 2008 | keithej2
Thanks for the reply. The IP3 we're working on is a 4400. We installed a new motor/encoder today but it didn't help. So far we've swapped the CPU, vision card, both LSOs and the servo cards. We've been poking around the relays and wiring tonight but
Electronics Forum | Tue Dec 14 11:05:43 EST 2010 | baildl632
We just received a Paragon 150 oven for production. We hadn't used it a week and we're getting "Top Blower Fail " alarm. I have checked all the top blower fans and they all are running. Can someone help as to why we're in alarm yet all the blowers ar
Electronics Forum | Sun Jul 09 03:05:14 EDT 2000 | Ben
Hi Hermie, Did you perform a Servo-zero-adjustment and Gain calibration on the amplifier after replaced it ? This is necessary fine turning when replacing the amplifier. You had better ask Fuji service center for the procedure. Hope this help you.
Electronics Forum | Wed Mar 14 08:45:41 EST 2001 | stefwitt
In order to track the board flow through your line you will have to hook up all conveyor input sensors as well as the last output sensor to a PLC. You can program the PLC to provide an alarm signal if a accumulative time of xxx hours for any board is
Electronics Forum | Fri Oct 02 09:52:49 EDT 1998 | Ben Wilmot
I am experiencing solder paste comtaminatin of nozzels on 0603 size components resulting in missing components. The machine is failing to alarm under these circumstances. Has anybody else experienced this problem & found a solution?
Electronics Forum | Mon Apr 15 18:42:23 EDT 2002 | paulausten
Do the in/out board sensors on reflow solder machine work well? Can they be relied on or do they cause needless alarms? What has been your experience?
Electronics Forum | Thu Feb 13 08:37:45 EST 2003 | MA/NY DDave
Hi David F, Hey I poked around the site above for a few minutes and didn't find anything, so I said HEY let David F do it if he chooses. Here is one item that gives some examples of flakeeeyyy responses. I have my own yet this was faster. http://w
Electronics Forum | Fri Jun 03 13:25:07 EDT 2005 | Bob R.
We have enough history to know that frequent profiles are a waste of time. We check the profile once a month, after any significant maintenance, and after a changeover. Other than that we rely on the alarms on the individual zones.
