Electronics Forum | Fri May 04 02:32:10 EDT 2007 | jmelson
Thanks! Well, the procedure in the book says to first calibrate the mech aligner with the beam sensor, but that exceeds the X travel. I guess you can just eyeball it off the nozzles and then use trial and error. While poking around on the machine
Electronics Forum | Mon Jul 30 10:23:30 EDT 2001 | hinerman
From the questions that I am asked from week to week, there are a number of key differentiating factors for tooling classes. They could be considered the headings of a decision matrix, where the tooling options are rows and the following items are c
Electronics Forum | Tue Aug 03 10:11:11 EDT 2010 | keiths487
we have an HSP that keeps giving nozzle level (low) out of tolerance, we have performed lighting check, also this condition is only showing up on 3 or 4 heads...any input appreciated
Electronics Forum | Wed Nov 10 02:33:49 EST 2010 | tagge
Got it starting at least.. it was the PCB stopper valve that needed some oil. Now Im stuck on trying to program, it complains about nozzles. It seems that it dosnt recognize it or its not initilazed right. I also cant get it to pick up a nozzle with
Electronics Forum | Sat Mar 03 21:00:36 EST 2001 | edmond
Panasert machine is known for programming ease. Both machines having U-axis indexing unit which may crash due to operator mishandling. Comparing the reliability and accuracy, the MPAV is more stable to MPA3F. MPAV using full vision for part regconiti
Electronics Forum | Fri Mar 23 19:50:57 EDT 2007 | Frank
Possible head combinations to pick from multiple 12, 16, or 24mm feeders. Note: you can not mix feeder sizes for simultaneous picks. KE-2010 and KE-2050 will use 1&3, 2&4, or 1&4 KE-2020 and KE-2060 will use 1,3,R or 2,4,R or 1,4,R I prefer to s
Electronics Forum | Fri Feb 16 09:16:19 EST 2007 | John S.
We conducted a DOE to establish our print setup parameters. These will of course depend on the paste you select, and the thing just runs. The techs store the head in a ziplock bag when not in use. When they need to run, they just attach the head,
Electronics Forum | Mon Oct 08 05:48:36 EDT 2012 | vinitverma
Dear Chris, N2324 and N2325 are for nozzle down sensors. THese sensors are located on the left and right side of the left and right walls of the head assembly respectively. There are very small holes in the walles through which these sensors transmi
Electronics Forum | Wed Jun 29 14:40:12 EDT 2011 | wrongway
Hello All We are currently running 3 universal smt machines one is an advantis lighting head all 3 machines are 2007 we run 2 shifts 5 days a week I have had very little trouble with them or the feeders. we have 2 universal through hole machines one
Electronics Forum | Fri Sep 09 10:43:58 EDT 2005 | ???
sounds like the part is being picked up on its side....which means.......it could be.... 1. pickup not taught correctly -- X-Y- or Z 2. head to camera calibration is needed 3. or least likely....feeder problems