Electronics Forum | Thu Mar 28 18:00:31 EDT 2024 | alexv
The tapping noise is what you hear when Hydra taps each tool on the tool bank to make sure the tips are seated well. The error is a Z-motor problem. The gear is at the top of the Hydra and needs grease. Have you cleaned the old grease and applied new
Electronics Forum | Sat Feb 10 17:12:03 EST 2001 | rpereira
I admit, 16 mil QFP printing is very challenging but if all your control factors (print speed, etc...) are setup correctly (through DOE) extremely high yields can be achieved and more importantly a repeatable and robust product will be manufactured.
Electronics Forum | Wed Jun 14 18:21:23 EDT 2000 | Robert Moore
It has been our experience that the problem you have discribed was not solder process related. We had two such instances in the past and both were component related. The first case involved a PLCC28 that failed test. Reflowing the solder seemed to co
Electronics Forum | Wed Mar 21 21:28:22 EST 2001 | davef
We have RF boards with ... * No solder mask * Strategically placed globs of solder It's possible that your boards will not work with NC flux res on them. We generally don't see noise problems. We loose one of the edges [front I think, but don't
Electronics Forum | Mon Jun 18 19:57:40 EDT 2001 | Gil Zweig
Dave: You pose a very good question. We have been in the electronics x-ray inspection business for 18-1/2 years and, to date, we have not received a single report of damage associated with x-ray exposure. However... we do see signs of long term x-ra
Electronics Forum | Thu Nov 11 18:28:10 EST 1999 | John Thorup
Hi Jeff Actually it's not necessarily Signal to Noise Ratio or even RF circuitry. All no cleans leave behind residue by description. This residue can affect RF or other high frequency circuits in a number of different ways including SNR. Very high
Electronics Forum | Fri Mar 19 15:48:08 EST 1999 | Cliff
Yeah, sure. How about above the SEARCH title in the left menu? And it wont present itself until there is mail. Not tough at all. I thought about adding a background noise, but that could be annoying. Cliff | Hey Cliff, next time you relayout the
Electronics Forum | Fri Mar 19 17:08:09 EST 1999 | Dave F
Neat!! | Yeah, sure. How about above the SEARCH title in the left menu? And it wont present itself until there is mail. | | Not tough at all. | | I thought about adding a background noise, but that could be annoying. | | Cliff | | | Hey Cliff, n
Electronics Forum | Wed Mar 02 04:32:07 EST 2005 | Hannu
Hi all We have an Omniflo 5 (-97 vintage) with pin chain conveyor. Lately the chain drive motor has started to emit some chirping noises, as if there were a bearing running dry or something. Is there some kind of maintenance schedule specified for t
Electronics Forum | Fri May 27 14:24:18 EDT 2005 | james
We are currently having problems with our SPM AV Screen printer. It is an intermitant problem, sometimes it will make a loud noise as the stencil is going down on top of the board and sometimes it does not meet its destination. Sometimes the machi