Electronics Forum | Thu Sep 12 20:55:39 EDT 2013 | marcelorotofrance
My own unit has an internal transformer also. It has multiple secondaries, and a divided primary which can be configured to the required voltage by changing jumpers. Best regards.
Electronics Forum | Thu Aug 29 05:01:38 EDT 2013 | bobpan
Motor Error 5 is usually an interlock error. Take off the rear right cover and look at the red and green led's on the driver cards. If they are both lit....you have a door open or if you have carts....a feeder base switch is up. Good Luck
Electronics Forum | Thu Aug 29 14:20:17 EDT 2013 | nophsem
Thanks for the response bobpan! LED's on the driver cards work well (green with doors closed and both red&green on with door open), and I don't use the carts. The head doesn't move after power on and inmediately you can listen alarm.
Electronics Forum | Fri Aug 30 10:35:54 EDT 2013 | nophsem
Data base Utilities --> Download MOD Codes to assembler) and the motor error # 5 appeared instantly in the handheld.
Electronics Forum | Mon Jun 16 11:36:28 EDT 2014 | bobpan
Are both red and green leds on for the driver cards (they are located in the bottom right of the machine). If they are both on then you have an interlock opened. If this is the case....check the side doors....sometimes they are not shut all the way.
Electronics Forum | Fri Sep 06 11:07:27 EDT 2013 | bobpan
Use the hht and do a function 6.....this will tell you the version of firmware that the machine is running and then you will know which mod code list to go from. good luck
Electronics Forum | Fri Sep 06 11:27:54 EDT 2013 | nophsem
Yes; I do it IVC V 2.07 1994 Quad SystemP SECS 2 SRX 1.64-6E
Electronics Forum | Fri Sep 06 11:37:43 EDT 2013 | bobpan
I dont have a list for anything that old. The oldest i have is version 2.10. Check to see if the mod code list that you have says what version it is.....usually its on the top of the document
Electronics Forum | Fri Sep 06 12:22:51 EDT 2013 | nophsem
the list doesn't include anything :-( What information should I find? what is referred to laser MODs are 64, 67 and 71, I can you mention some other
Electronics Forum | Fri Sep 06 12:49:45 EDT 2013 | nophsem
OK my friend, thank again! so... get to work!!! laser+dispenser!!! very good challenge! ;-) Have a nice weekend!