Electronics Forum | Mon Oct 31 13:04:15 EST 2005 | bobpan
Dave, The quad 1000 was a samsung machine with quads name on it......the software sucks and it is totally different from central controller. If you go for a machine....go for a 2c r 4c if you still want to use the same feeders. Chip shooter means 080
Electronics Forum | Tue Feb 28 14:49:48 EST 2006 | vdizzle
Yep Grid-Lok sucks for thin boards. We have it set up in 4 Dek Horizon 01s. Grid-Lok is actually strong enough to snap really thin boards. Other than that, the system has been great, especially if you have to do 10-12 changeovers per line per shif
Electronics Forum | Thu Mar 30 09:32:54 EST 2006 | russ
Not arguing dan, but are you positive that they are not copper? anyway, what is happening is as the parts sucks down onto the board from reflow the extra paste is notnecessarily sqeezed out but it has no place to go. So it will form this ball on th
Electronics Forum | Tue May 16 08:42:12 EDT 2006 | smtspecialist
Thanks Chunks, I do have a very good maintenance done on a monthly basis to clean the accumulation of flux and I never saw nothing dripping, the operators says sometimes that I'm a bit too picky on the cleaning but that's the key to impress customer
Electronics Forum | Mon Sep 11 14:58:16 EDT 2006 | cuculi54986@yahoo.com
Steve, Let me guess, you were using this one: http://www.panasonic.com/industrial/components/pdf/abd0000ce10.pdf That part sucks. They have a newer part number that is supposedly "reflow-friendly". Unfortunately, I can't convince our quality de
Electronics Forum | Fri Nov 10 16:24:26 EST 2006 | cuculi54986@yahoo.com
What we've seen is more heated length gives you the ability to run the oven at a higher chain speed. Notice, heated length... not # of zones. Needing to achieve higher temps at reflow can cause you to have to reduce your chain speed. For l
Electronics Forum | Fri Feb 01 15:09:43 EST 2008 | chef
Don't do it.!!!! Are you nucking futs? Why is pre-bake required? Are you producing in high humidity? Is the package of the device poroues enough to suck in moisture? Think, consider you will not get an even "bake", the outside of the reel will get
Electronics Forum | Fri Mar 14 11:28:09 EDT 2008 | operator
I agree. The only way to make them care is to show them how it effects their pocket book. If you don't charge them they will continue not caring. If you do charge them you risk hurting their feelings and making them look bad in front of their bosses
Electronics Forum | Wed Mar 25 14:55:17 EDT 2009 | cyber_wolf
The small x motor quit working.It seems that there is no voltage going to the motor. Here is what I have done so far: *Verified that the motor is good. *Check pico fuses on the backplane *Verify voltages on backplane and on big booster. *Swap mot ca
Electronics Forum | Mon May 14 13:20:22 EDT 2012 | kahrpr
first I am personally not a fan of dross reducers. We have enough issues with contaminants on boards (high impedance analog) so i do not want to introduce more contaminants into the process. Second I have not had much luck with any dross reducers. We
