Electronics Forum | Wed Oct 26 08:26:07 EDT 2011 | edmaya33
Anybody here with extensive knowledge with PVA650/2400SF coating robot? I wanted to know the semi perfect settings for my FCS-300 valves. Anybody can share their thoughts. Tank Pressure: Atomized Pressure: Path Speed: Path Distance: Height: Valve op
Electronics Forum | Sat Oct 29 12:53:34 EDT 2011 | dontfeedphils
We had the same motor problem with our My12, whenever we would get the sound we would go through and slow down X accel speed in any packages and the placement accuracy as well. After doing this for quite a while we finally tried updating the motor c
Electronics Forum | Fri Dec 09 18:35:01 EST 2011 | ngotranbestek
I have Oven Heller 1912EXL. I bought it is used machine ago 6 month Do anybody have experience about it? - How many speed Rail? - How many Zone need set, (10 zone or 11 or 12 zone need set?) - How is 3 cooling zone? need set or no?. ...
Electronics Forum | Tue May 22 10:36:56 EDT 2012 | cbeneat
I can't see the fill as they are underneath the connector. As far as the direction 95% seem to be perpendicular to the wave with the occasional parallel and some all the way around(not many). I have tried altering the speed, I've played with the fl
Electronics Forum | Tue May 22 11:08:12 EDT 2012 | patrickbruneel
It sound like this connector is a serious head sink which can be solved with more preheat or slower conveyer speed. It might also be a combination of the heat sinking capability of the connector together with encapsulated flux underneath the connecto
Electronics Forum | Wed Aug 01 11:22:25 EDT 2012 | davemac62
ERROR: "The specified i/o operation on DeviceHarddisk0Partition01 was not completed before the timeout period expired" This is followed by out of control conveyor speed and zone temps. Oven recovers when the error is acknowledged. This is happenin
Electronics Forum | Mon Aug 27 13:02:32 EDT 2012 | rway
We will look at the oven speed. We considered stiffeners but opted against that due to the risk of moving parts pre-reflow due to handling. 90 deg? I don't know. This may or may not help with the bowing. Considering there is little to no substra
Electronics Forum | Mon Sep 24 18:03:43 EDT 2012 | rmazenha
Hi, i am using AIM 264-5 No Clean flux for soldering alpaca pieces on PCB boads, but i am having problems: poor filling and no solder. I am using SAC 305 lead free solder. I have tried to change flux pressure, time, ammount as well solder speed an
Electronics Forum | Wed Dec 05 18:19:39 EST 2012 | cnotebaert
You should talk to your paste/flux manufacture! They will provide the best instruction for this. The norm is typically 130-145f, speed 2-4f/m I always push for slower… the slower the cleaner/drier (in theory!), if you have an ICOM, Omega meter, ionog
Electronics Forum | Wed Dec 19 10:33:58 EST 2012 | emeto
I had a connector like this and here is my recommendation: 1. Flux type(I like better alchohol based flux than water based) 2. Try higher soldering speed(when I say higher I mean several times higher) Goodf Luuck!
