Electronics Forum | Mon Aug 08 16:14:36 EDT 2011 | wmburke
We are building a plasma diagnostic to monitor MHD phenomena in tokamak. As part of the development, we need high-voltage, high-power RF capacitors to tune and match an inductive load. This application is similar to a small induction heater, with t
Electronics Forum | Thu Aug 11 07:01:34 EDT 2011 | franxsmt
Thank you very much for your informative and helpful reply. I have a few more questions:) 1- So for the case 1: should I apply the glue to the PCB with the same method as I apply solder paste? (with screen printer and squeegee). If so, I would guess
Electronics Forum | Fri Aug 26 10:37:24 EDT 2011 | ndion
I'm looking for some guidance here and would appreciate input from some seasoned professionals. I am the Op. Mgr. for a medium sized electronics contract manufacture, but my background is almost exclusively in the machine tool industry and I would li
Electronics Forum | Tue Oct 04 11:54:49 EDT 2011 | davef
We'd like to help you, but we don't have a clue of what you're talking about. * Which 'heatseal' machine are you using? Is that a reflow soldering machine? See, we think of a heatsealing machine as one that bond the two sides of a plastic bag togethe
Electronics Forum | Thu Oct 20 19:35:45 EDT 2011 | eadthem
Your kinda vague on your description, How many components per hour, how many circuits per a day, week, month? what kinds and size of parts.? For a PNP setup for smt boards you will need a stencil printer(possibly manual or full auto like a DEK, 1 o
Electronics Forum | Tue Jan 03 17:38:38 EST 2012 | davef
Here's two ideas fro the fine SMTnet Archives: * On the bare board, during design / layout, the basic shape of the jumper is a 125 thou disc of copper [that of course is eventually covered with whatever solderability preservative we use on the board]
Electronics Forum | Fri Jan 20 12:46:21 EST 2012 | deanm
If 3-5% of the attempted parts placed are dropped, you have a serious problem...that's 1 part dropped for every 20 or 30 placements. Does it mean that it drops the part in the scrap bin and then successfully places the same part or would the board co
Electronics Forum | Thu Feb 16 12:16:36 EST 2012 | jax
I would assume every EMS company runs into this issue on a daily basis. Before we get to how a machine handles it, I would recomend setting up an acceptance criteria with your board supplier... if you plan on accepting them at all. (ex. No more than
Electronics Forum | Tue Feb 21 16:38:18 EST 2012 | comatose
We finally can't avoid adding wave solder to our process anymore. For lead-free, medium sized wave I'm leaning towards mid 2000s senju units as the best fit. I've never run their equipment. Opinions? As a point of reference for our general capabilit
Electronics Forum | Wed Mar 28 09:59:47 EDT 2012 | bradlanger
Sounds like you have tried everything I can think of as far as hardware is concerned. One thing that sounds suspicious to me if the error "Failed to create empty document". I have only seen that error when my MMI software got corrupted in the process