Electronics Forum | Mon Oct 11 12:58:21 EDT 1999 | John Thorup
| In a cost-reduction effort, our Design group is attempting to eliminate silk-screen (legend ink) on some new products. By the elimination of this process, there will be a slight decrease in the cost of the bare board. | | Presently, the silk scre
Electronics Forum | Mon Oct 11 13:53:45 EDT 1999 | Dave F
| In a cost-reduction effort, our Design group is attempting to eliminate silk-screen (legend ink) on some new products. By the elimination of this process, there will be a slight decrease in the cost of the bare board. | | Presently, the silk scre
Electronics Forum | Tue Oct 12 04:18:12 EDT 1999 | Scott Davies
| | We have three buckets filled with leftover solder paste from our screen printing process. Kester has informed me that they no longer take paste, but only dross and pot dumpings. Does anyone know if there's someplace I can recycle this, or am I
Electronics Forum | Tue Oct 12 04:26:30 EDT 1999 | Brian
| We have three buckets filled with leftover solder paste from our screen printing process. Kester has informed me that they no longer take paste, but only dross and pot dumpings. Does anyone know if there's someplace I can recycle this, or am I go
Electronics Forum | Mon Oct 11 06:43:13 EDT 1999 | rjk
Hello Brian Thanks for your quick reply. I should explain my situation. We are packing modules in trays for transport. We are currently using Conductive PS as material for the tray base. I am in the process of setting up a new company to manufacture
Electronics Forum | Sun Oct 10 00:40:42 EDT 1999 | John
| I'm searching for a source for surface mount socket savers that accept a hand test socket (Yamaichi, Nepenthe etc...). Barring availibity of an SMT socket saver does anyone know a good technique for soldering socket savers into a .250" thick, 20+ l
Electronics Forum | Thu Oct 07 20:43:16 EDT 1999 | Dave F
| Make sure you check the MSDS for the new paste. If you have more than one production line, I'd suggest a gradual changeover. One selling point for management would be the free training Multicore will give you for the switch. If you haven't alrea
Electronics Forum | Thu Oct 07 21:07:45 EDT 1999 | Bix
| | Make sure you check the MSDS for the new paste. If you have more than one production line, I'd suggest a gradual changeover. One selling point for management would be the free training Multicore will give you for the switch. If you haven't alr
Electronics Forum | Thu Oct 07 03:08:57 EDT 1999 | Chris May
| I recently had the opportunity to visit the vendor who is making my boards. On my trip I noticed that the guy who was in charge of the SMD placement machine (brand new Samsung) still had to manuallly place about 20%-40% of the parts after placement
Electronics Forum | Wed Oct 06 22:02:48 EDT 1999 | JAX
| Our first article inspection after machine placement can take several hours depending on the complexity of the board. The operator visually checks the board against the drawing and bill of material. I'd be interested to hear if there are any other
