Electronics Forum | Mon Jan 29 06:44:59 EST 2001 | Scott B
I have recently come across a device which has a palladium over nickel finish which when soldered shows evidence of poor wetting to the lead ( i.e. a wetting angle greater than 90�) about three quarters of the way up the side of lead. This is only vi
Electronics Forum | Wed Jan 31 20:10:03 EST 2001 | davef
I�ve seen this chatter about "fully compatible with families of alloys" in the trade journals and never really thought about it, until you posted. [You know, stay focused, don�t get distracted by what�s going on out there, and all that stuff.] Then
Electronics Forum | Thu Feb 08 09:07:22 EST 2001 | Hussman
OK, without knowing the specifics, why does everyone blame the oven? Most solder balls occur around R's and C's in almost every shop I've been to. The best place to start looking is the screen printer - not the oven. Sure the oven is the last proc
Electronics Forum | Wed Mar 14 17:52:49 EST 2001 | davef
6 Work Life Test 6.1 Obtain a stencil with 15 to 20 rows of a series of 0.025 by 0.050 inch apertures spaced 0.050, 0.040, 0.025, 0.015, 0.010, 0.010, 0.025, 0.040, 0.050 inches apart. See Appendix 1. Source of supply: Metal Etching Technology.
Electronics Forum | Wed Mar 21 19:39:06 EST 2001 | davef
Thank you for the contributions you've made in this thread. May be setting people free to be involved in other areas is the answer. Situations that have me grinding my teeth are: * The head of Purchasing drop-ships a reel of resistors to a burn-in
Electronics Forum | Tue Apr 03 22:03:18 EDT 2001 | davef
With friends like you, who needs enemies? I�d guess that the perceived benefits of flat pads for your 20 mil pitch and below components counter-balance the higher cost, gold being a solder pot contaminant, limited solder mask compatibility, potentia
Electronics Forum | Tue Apr 17 09:38:04 EDT 2001 | CAL
With some help from our good Friends at Agilent Technologies our RF Lab includes testing up to 100GHz. Equipment includes Vector network analyzer, signal analyzer, dual channel power meter, noise filter meter, advanced impedance analyzer (including
Electronics Forum | Thu Apr 19 11:04:43 EDT 2001 | Spanky
All, We are getting ready to start running with 0201 passives. I have never run these before. We have run some 0402s however. We don't have any assemblies in-house yet, so I can't give any intelligent information regarding the board design (size,
Electronics Forum | Mon Apr 23 17:30:08 EDT 2001 | davef
Step 1: Print paste on the board, skip placement, reflow the board, check solderability. Step 2: Goto Step 1. White Tin Solderability: The most common reason for solderability issues with the white tin surface coating during multiple thermal excur
Electronics Forum | Thu Oct 26 13:56:08 EDT 2000 | ptvianc
Hello: Pre-baking laminates should only be performed:(1) to meet contractual agreements or (2) in response to an actual defect that can be traced to PWB water absortion. Besides the fact that a pre-bake is an enormous process "bottleneck," it also
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800
