Electronics Forum | Fri Apr 06 00:08:41 EDT 2007 | barney
What software level do you currently have on your machines? If you have UPS+ 6.2.x there is a huge improvement. In the SOIC/QFP or any leaded catagory you will find a check box under the vision tab called noise filter. Check this box and the software
Electronics Forum | Tue May 29 15:10:30 EDT 2007 | realchunks
Hi Jerry, Sounds like the white stuff is flux. I doubt if 4 pcb mfgers could be undercuring all at once. Good point though. Since you changed washers and now have the problem - it's your new washer. Can you bring back the old one to make sure?
Electronics Forum | Thu Jul 19 17:10:43 EDT 2007 | jamyboy
You might want to check the Xwagon bearings. We had the same issue with the TP9-UFP we ordered all the possible parts Xmotors small large, encoder, transducer, couplings etc. over 10K worth of parts. The only thing we didnt order was the actual x-wag
Electronics Forum | Tue Aug 14 10:53:15 EDT 2007 | rgduval
Should be do-able. Check out a couple of things: 1. Temperature tolerance of the LED's. If they can't withstand reflow, then you won't be able to do it. 2. Height of the LED's versus the travel of your pick/place. If your pick/place head won't t
Electronics Forum | Tue Sep 18 18:03:52 EDT 2007 | fnorradd
Thanks for all of the informations guys, after spending some time rechecking the set ups and checking for worn components in case there was something i missed, i then took some time whilst an operator ran the machine to watch. Whilst doing this i no
Electronics Forum | Tue Oct 09 01:40:06 EDT 2007 | jola
Once a week seems a little to often in my oppinion, we do it every 3 month. As i se it we do it just to make sure that the sensors and other messuring equipment are showing us the truth and not beginn to drift away. We also have some customers that r
Electronics Forum | Thu Jan 24 10:38:37 EST 2008 | vikkaraja
Hellow there, I need some help with a very old CP machine. It worked great until this past week.All of sudden it stoped woking. It does not index the feeder during production.I checked rotary selonoids already in the CAM box for first station and noz
Electronics Forum | Fri Feb 01 02:46:23 EST 2008 | bartlozie
Hello, If I do understand it correct, the dust in your oven are salt-crystals, comming from No-clean fluxes. We had them also once, it was a problem with one fan in the oven, I think you should check your fans inside the oven. Our extraction was OK,
Electronics Forum | Thu Mar 20 07:58:12 EDT 2008 | cyber_wolf
#1Run a Fuji gold board and see if the problem persist. Is your board clamp slipping? Fid camera tight? etc.. To see if you have a Y axis positioning problem: 1.Put the machine in mecha check 2.Go into Y-axis 3.Place a dial indicator so that the st
Electronics Forum | Wed Mar 26 09:26:12 EDT 2008 | lloyd
I know you said you checked your clamps but another look will do no harm. we had a very similar issue a while back, and it turned out that the plastic shim under the chase clamp magnet was damaged. This caused the chase clamps not to release properly