Electronics Forum | Thu Aug 16 14:25:17 EDT 2007 | doug
Hello Angie, Have a look at http://www.focalspot.com... FocalSpot, Inc. is recognized worldwide as a leader in the design and manufacture of affordable high-quality x-ray inspection systems. FocalSpot also sells, reconditions and supports pre-owne
Electronics Forum | Tue Jan 10 12:17:17 EST 2006 | Rob
Hi, The ROHS compliant parts are usually Matte Tin on the outer terminal plating. There are also 2 further types of metal on the average chip cap - the undercoat metal of the outer electrode & the inner electrode. These are usually the same & are
Electronics Forum | Mon Feb 27 20:17:54 EST 2006 | SJ
Could anyone kindly share any good/bad experiences that they have with their MRP / ERP systems in a small-mid size contract manufacturer environment? We've been using DBA Classic but is looking for a more scalable, robust system. Our main concern i
Electronics Forum | Mon Jun 26 23:33:20 EDT 2006 | KEN
We saw this condition over 3 years ago. It sometimes is called "champagne bubbles". The intemetalic formation is interrupted due to the micro voiding reducing mechanical strength. I discovered this on lead free test vehicles for a major computer
Electronics Forum | Tue Aug 22 15:26:39 EDT 2006 | fastek
I certainly would not buy off any product from a manufacturer that is for sale. Imagine they have known they were going to do this for some time now and all of the cost cutting and apathy that is occuring at this time does not bode well for their cus
Electronics Forum | Mon Oct 02 11:23:04 EDT 2006 | ccapezza
EFD, Inc. manufactures adhesive dispensing equipment and may be able to offer assistance with your application. Check out our product information at http://www.efd-inc.com. We manufacture dispensing equipment ranging from manual dispensers to XYZ b
Electronics Forum | Tue Oct 17 21:59:47 EDT 2006 | jovial_guy23
Hi Steve, I agree with you that cleaning under LCC's is often difficult but its not impossible. In order to clean the residues, the most important thing to consider is the right compatibility of the fluxes with the cleaning chemistry. There are seve
Electronics Forum | Mon Nov 20 11:58:16 EST 2006 | Rob
We try and do it all (Vac pack, dessicant, indicator card, MSL level, PBT, end termination material etc.) however it throws a spanner in the works if you pull a manufacturer's sealed pack from stock and the vacuum has gone where an edge of a tray has
Electronics Forum | Fri Dec 01 06:31:53 EST 2006 | CHITRA K
We use SMBJ5.0A - D0214A package component in our products.During production recently we have identified a seroius problem. The problem is, After reflow soldering the impedance becomes more / lesser and due to which the product does not work since th
Electronics Forum | Tue Feb 06 13:24:31 EST 2007 | stepheniii
Good afternoon, > > You have to use lead paste > since none-RoHS components won�t withstand > elevated temperatures. Solder paste manufacturers > offer a lot of transitional pastes designed > specially for mixed process. Ask your paste > suppli
Electronic manufacturing services - electronic design, development and manufacturing. Circuit board design, prototyping, FPGA services, signal integrity and simulation, pcb assembly. Factories in California USA and Malaysia.
Manufacturer / Consultant / Service Provider
3240 Scott Blvd
Santa Clara, CA USA
Phone: +1 408 980 0400
