Electronics Forum | Tue Dec 30 09:31:52 EST 2014 | rgduval
I've always approached it like this: Design your processes and perform your work to class three standards, and inspect to the standard that is acceptable. That is, all work should be performed to the highest degree of quality. When the work is ins
Electronics Forum | Thu Feb 12 16:42:33 EST 2015 | hegemon
I can only speak for Mirtec and Yestech AOI for SMT Solder Inspection. We do use Koh-Young AOI for Solder Paste Inspection. As usual ,you need to identify exactly what it is you are trying to achieve with your AOI, if you are just trying to fill a
Electronics Forum | Fri Feb 20 18:00:35 EST 2015 | hegemon
We have this Robot. We have the large table model from Fancort. We have incorporated the machine into a process where it finishes up the through hole soldering that the selective soldering machine cannot reach effectively. About 2200 joints done wit
Electronics Forum | Fri Feb 20 18:01:02 EST 2015 | hegemon
We have this Robot. We have the large table model from Fancort. We have incorporated the machine into a process where it finishes up the through hole soldering that the selective soldering machine cannot reach effectively. About 2200 joints done wit
Electronics Forum | Wed Jun 08 17:35:04 EDT 2016 | slthomas
We all know that whenever possible, we want thermal relief between the barrel/pad and the copper foil to make it easier to properly solder that through hole connector. My question is, assuming there is no connection from the barrel to a copper layer
Electronics Forum | Wed Jul 05 05:07:51 EDT 2017 | heros_electronics
Hi Claire, Is it a 4G smart phone? Generally, 4G pcb board is HDI pcb with laser drilling and small line width and space, and not all PCB suppliers can manufacture because HDI PCB has special requirements for equiment, and small factory can not
Electronics Forum | Tue Mar 06 13:39:49 EST 2018 | GTune
Hello everyone, I am having trouble with our UIC VCD through-hole pick and place machines. It has been sitting around for several years now and I had to replace half the gaskets in the machine which werecausing slow movement. I'm getting an error mes
Electronics Forum | Tue Apr 23 10:31:59 EDT 2019 | laserpro
Hi all and thanks for viewing my post! My questions related to the subject line are as follows: 1. Does the Epoxy Solder Mask Layer of a PCB protect against moisture absorption? Is this a primary function of the solder mask? 2. Does exposed FR4 na
Electronics Forum | Tue May 21 13:17:47 EDT 2019 | SMTA-Thomas
2.54 μm [100 μin] gold thickness and all through-hole leads that will be hand soldered regardless of gold thickness” (we automatically solder wash all components which violate this requirement). In all cases we have attempted different no clean flux
Electronics Forum | Thu May 04 01:52:17 EDT 2023 | davef
Look at IPC-7526 - Stencil and Misprinted Board Cleaning Handbook, Misprinted Circuit Board CleaningCLEANING [ https://www.multi-circuit-boards.eu/fileadmin/user_upload/downloads/leiterplatten_design-hilfe/ipc-7526.pdf ] ITW/EAE says "Typically, th