Electronics Forum | Fri Oct 14 09:58:13 EDT 2005 | patrickbruneel
Here's what I believe is happening. The main difference between the HASL boards and the gold plated boards is that HASL boards are pre-soldered. HASL boards need very little flux activity to get good hole fill and the machine settings have a wide pro
Electronics Forum | Fri May 09 17:47:37 EDT 2003 | slthomas
I think medical manufacturers are more inclined to proceed with caution because they have so much more at stake when something fails out of the box, or worse yet during a code. A lot of them locally have gone outside for pcb assembly, but stayed dom
Electronics Forum | Tue Dec 21 18:08:40 EST 2010 | cbroegger
Hi Gary. I have the same problem on my Siplace feeders, and have tried different products like you have. This is what I have experienced so far: The "bag sealer" method does not really work well. Problem is that the tape foil type (plastic type) var
Electronics Forum | Fri Oct 14 11:56:49 EDT 2005 | patrickbruneel
Mika, 1.) Is there a maximum board thickness where it would be almost impossible to get a decent hole fil? Answer: The thicker the board the further the solder has to travel and the more you depend on solderability of boards and components, machine
Electronics Forum | Tue Dec 07 10:47:09 EST 2010 | walkbury
As a high mix, low volume CEM who deal with a lot of free-issued kits, we are heavily reliant on foil (tape cover) extenders. We don't usually bother with splicing as our machine feeders (Simenes Siplace and Samsung SM321) are designed in such a way
Electronics Forum | Tue Apr 17 13:07:17 EDT 2012 | rodrigo
Well... after much headache I found a bad relay contact in M1CR1E. The good news is somehow the axis are no longer jerking. The bad news is that it still does not work. When I turn it on now it shows this: emergency stop (in red) waiting for reset
Electronics Forum | Tue Dec 05 01:03:42 EST 2006 | ____
The manual is easy to follow. If using 274-X gerber it is really easy. All you need is a silkscreen layer and a paste or mask layer. If not 274-X, then you also need an aperture file. If you possess a valid license, AEGIS can help you over the phone.
Electronics Forum | Fri Sep 17 15:51:07 EDT 1999 | JohnW
| | | I am not familiar with the "mil" metric. How many inches is in 1 mil? | | | | | | ...or 10 mil? | | | | | | | | 1 mil= .001 inches | | 10 mil= .010 inches | | Also, it has nothing to do with metric. | | | I was also confused with this sta
Electronics Forum | Thu Mar 03 11:00:04 EST 2005 | PeteP
In a nutshell, what are the Rev D changes to the standards? What re-certification requirements are in place?
Electronics Forum | Mon Dec 04 11:32:42 EST 2006 | rich
Maybe try Unisoft ProntoPLACE software to program Mydata. www.unisoft-cim.com/pcbplace.htm 203-913-0782
winsouce.jpg)
.gif)
