Electronics Forum | Sat Nov 18 08:42:11 EST 2006 | davef
Bow & twist: IPC-A-600. Acceptability of Printed Boards 1.5%; Goal 0.005" per inch; Practicle 0.007" per inch
Electronics Forum | Wed Nov 29 11:46:57 EST 2006 | slthomas
IPC 610 *C* states that the solder thickness requirement is a properly wetted termination is evident. Fillet height is another aspect and is usually specific to the package but is some function of solder thickness plus a percentage of lead height. D
Electronics Forum | Mon Jan 08 10:29:15 EST 2007 | jaime39
The water soluble flux residue is staying there because the rinsing temperature it may be too low. The flux needs about 130-140 degrees celcius to become soft. If you are using water soluble flux, as per IPC A 610 standards it needs to be remove comp
Electronics Forum | Fri Jan 19 02:03:09 EST 2007 | lococost
As a sidenote, if nothing of the above works, IPC 610 states that it is accetable (class 1,2,3) for solder to touch a SOT body if it is plastic.
Electronics Forum | Thu Jan 04 13:12:22 EST 2007 | russ
do not touch copper boards, use cotton gloves. IPC 610 has some handling guidelines that you may want to look at. Russ
Electronics Forum | Thu Jan 04 16:29:11 EST 2007 | patrickbruneel
Steve And here another good article from Laura Turbini http://leadfree.ipc.org/files/RoHS_14.pdf Want more??
Electronics Forum | Mon Jan 08 23:39:53 EST 2007 | raychamp007
HI Friend, My SMT Production Floor RH reading are 38%RH to 65%RH. It is within control or as per IPC/J-STD or orthers industries standard recommendation? Hope to hear comment from anyone. Thanks!
Electronics Forum | Wed Jan 24 22:46:08 EST 2007 | fastek
It wasn't IPC's choice. They were kicked out of Anaheim because it takes too long to set up and dismantle the APEX show. At least that was the story going around last year at this time.
Electronics Forum | Tue Jan 23 17:48:17 EST 2007 | GS
for SMDs, try to look for EIA-481.1.2.3, or may be the new version EIA-200 if I am not wrong. Also IEC 60286-2 (leaded components like axials, radials,..) Regards......GS
Electronics Forum | Thu Jan 25 04:47:19 EST 2007 | GS
see also the complete specific series of IEC-60286,IEC-60286-3, IEC-60286-4, IEC-60286-5,IEC-60286-6. All of those specs are realated to packaging specifications. Tape, reel,stick magazine,tray, bulk case,etc. Regards.....GS
IPC is the trade association for the printed wiring board and electronics assembly industries.
Training Provider / Events Organizer / Association / Non-Profit
3000 Lakeside Drive, 309 S
Bannockburn, IL USA
Phone: 847-615-7100