Electronics Forum | Thu Dec 05 22:46:39 EST 2002 | davef
While J-STD-001 specifies an upper limit for acceptance of assembly, we use Resistivity Of Solvent Extract testing as a process control. In truth, this "LT 10.07 �gm/sg in NaCl equivalent" measurement has substantial limitations, not the least of wh
Electronics Forum | Thu Apr 03 11:36:54 EST 2003 | stefwitt
I don't know too much about Fuji, but I'll try myself anyhow. How is the coplanarity unit communicating with the machine controller? Attach a logic analyser, second listener or data analyser and "listen" to the communication with the machine contro
Electronics Forum | Wed Oct 22 17:26:59 EDT 2003 | Terry Munson
Yes Ion Chromatography can when using a isolated extraction system called the C3 tester. Please email me or call of-line and we can show you what we have done for others to not only idendity the flux cleanliness levels but to qualify the cleaning pr
Electronics Forum | Fri Nov 28 04:46:45 EST 2003 | gregoryyork
Best to establish what type of residue is causing this problem and then stamp it out.Speak with SCOPE Labs who offer PCB extraction followed by IR and IC work. So many problems with porous resist at present and NON ionic materials that you really nee
Electronics Forum | Fri Dec 19 08:47:47 EST 2003 | browning
I recently found a company that will take the Gerber data and create full Documentation and machine programs from Gerber. The cost is extremely reasonable, so much so, that I have been having them do all of our work. I cannot even do the work myself
Electronics Forum | Thu Jan 15 08:39:26 EST 2004 | Patrick
Thanks for the reply, I do know that the HASL finish is "domed " on opposite sides of a QFP site & "smooth" on the other two sides. (ie. Sides 1 & 3 are domed, & sides 2 & 4 are smooth ) depending on the direction the PCB was extracted from sol
Electronics Forum | Fri Jul 23 05:25:20 EDT 2004 | greg york
Got to agree with John on this, get a stencil cleaning wipe something a little more potent than standard IPA and wipe the surface thoroughly, this should produce a green residue of solder resist. If this does happen then ask your PCB vendor to look a
Electronics Forum | Fri Oct 29 05:28:32 EDT 2004 | dj_jago
I think you would be better off designing routing slots into your panel and then use a high speed router to cut out the PCBs. PMJ Automec/Cencorp make such equipment (I used to work for them) but have no affiliation to them anymore. Alot of peopl
Electronics Forum | Tue Nov 22 10:37:48 EST 2005 | haviland
Steve--Depends on the number of sku's they're talking about. Consider a small vertical enclosed carousel that will hold the small 6" AKRO (or equal) plastic bins. Push a button & the machine rotates the shelf. Parts are extracted manually. Foot print
Electronics Forum | Thu Jan 04 04:49:51 EST 2007 | geb
Thanks, Chunks. Your first post was correct, it turned out to be the battery. That is that problem solved. Unfortunately I have now got an error message saying Flux Management Failure. Is this just a coincidence? It sounds like something to do with t