Electronics Forum | Sun Jul 15 21:00:37 EDT 2012 | sarason
Try using the accounting functions in my program PCB Synergy. http://members.iinet.net.au/~sarason/ It can calculate the number if components used in a run by simply importing the PCB or the schematic or a PIK file. It generates CSV which has the num
Electronics Forum | Fri Mar 15 20:56:55 EDT 2013 | marcelorotofrance
At this point all the sensors, switches and solenoid valves were checked. Their electrical signals and actions were phisically checked at the I/O cards level (Panadac 783-065 and 065A). Above mentioned signals were monitored from "I/O Monitor" functi
Electronics Forum | Tue Dec 02 06:44:59 EST 2014 | cbeneat
Here's what I found online, 602 Placement accuracy ±40µm/chip (Cpk1) If you need the flexibility to switch from ultrahigh-speed placement to multi-functionality on site, the CM402 high-speed interchangeable platform, modular placement machine is the
Electronics Forum | Fri May 08 17:34:09 EDT 2015 | dwkingcan
Feedback regarding Factory Logix NPI. This software is not as refined. The importing function for ODB++ files (typically the best CAD source files for creating programs and documentation) ignores vital elements for complete and accurate documentati
Electronics Forum | Tue Jan 12 00:43:20 EST 2016 | jrterry
I am shopping around for a cheap pick and place to do a few small runs of boards, just something to hold me over until I get things lined up to buy a high quality permanent machine. I have come across a few Quad 100s that are ridiculously cheap and
Electronics Forum | Wed Nov 27 20:29:26 EST 2019 | sssamw
OK, if has concern on void in the function pin area, you need cross section of the pins solder joints, to see how much area ratio of the void to solder joint area. Of course you need make sure solder joint (the toe and heel, height)meet IPC requireme
Electronics Forum | Mon Apr 10 00:25:40 EDT 2023 | shrikant_borkar
Hi, Before the replacement of any lubricant Please check and validate the Specifications of previous lubricants. Please get the written equivalent certificate from your supplier. also let notify your machine manufacturer about this .there shoundnt ve
Electronics Forum | Fri Jan 12 10:23:24 EST 2001 | John Litva
Thanks for the info Patric...! Using that and the info I recvd on the PIC I jumpered across the resonator and the board now functions. We'll be testing tonight with the Heli and see how it goes. Thanks for everyone's help! John L.
Electronics Forum | Fri Jan 12 10:25:03 EST 2001 | John Litva
Thanks for the info Patric...! Using that I found the resonator on the Manu's website. Armed with that and info I recvd on the PIC, I jumpered across the resonator and the board now functions. We'll be testing tonight with the Heli and see how it
Electronics Forum | Mon Jul 31 14:41:47 EDT 2000 | lucky
Hi I have some people that are good with the IP3 pd's send it to me with a brief description of how it looks and I will try to solve this problem.