New Equipment | Fabrication Services
Low Cost Heavy Copper PCB China 4 Layers Circuit Boards Supplier Quick Details: FR4 base material 1.6mm board thickness 2oz heavy copper Plating gold finishing RF custom PCB boards Used for Radio Frequency From China PCB manufacturer Specifications
1��Materials��FR-4��CEM-1�� High-Tg170, Teflon, Aluminum-base, Iron-base 2��Layers: Single, Double Side, Multi Layers (Less than 22 Layers) 3��Finished Surface: HAL,Lead Free HAL, Immserion Gold,Plating Flash Gold, O.S.P., Gold-Finger, Carbon Ink, P
Agile Circuit Co., Ltd is an experienced professional supplier of printed circuits. We are specialized in meeting your needs in all PCBs
Technical Library | 2021-10-20 18:21:06.0
The solderability of the SAC305 alloy in contact with printed circuit boards (PCB) having different surface finishes was examined using the wetting balance method. The study was performed at a temperature of 260 _C on three types of PCBs covered with (1) hot air solder leveling (HASL LF), (2) electroless nickel immersion gold (ENIG), and (3) organic surface protectant (OSP), organic finish, all on Cu substrates and two types of fluxes (EF2202 and RF800). The results showed that the PCB substrate surface finish has a strong effect on the value of both the wetting time t0 and the contact angle h. The shortest wetting time was noted for the OSP finish (t0 = 0.6 s with EF2202 flux and t0 = 0.98 s with RF800 flux), while the ENIG finish showed the longest wetting time (t0 = 1.36 s with EF2202 flux and t0 = 1.55 s with RF800 flux). The h values calculated from the wetting balance tests were as follows: the lowest h of 45_ was formed on HASL LF (EF2202 flux), the highest h of 63_ was noted on the OSP finish, while on the ENIG finish, it was 58_ (EF2202 flux). After the solderability tests, the interface characterization of cross-sectional samples was performed by means of scanning electron microscopy coupled with energy dispersive spectroscopy.
Materials: FR4 ,Aluminium,FPC layer: 1-12 Board thickness: 0.4-4.2mm Copper:0.5-3oz Finishing: Plating gold,immersion gold,immersion silver,Pb free HAL,OSP, Min.hole size: 0.10mm(Blind and burried hole available) Min. Line/Space: 0.10mm/0.10mm The
New Equipment | Assembly Services
• Place of Origin: Guangdong, China (Mainland) • Brand Name: ShanXu • Model Number: FPC RoHS Compliant • Number of Layers: Single-sided, Double-sided, Multi-layers and Flex-Rigid PCB • Base Material: Polyimide(Kapton), Polyester(PET), FR4 • Copp
New Equipment | Assembly Services
• Place of Origin: Guangdong, China (Mainland) • Brand Name: ShanXu • Model Number: PCB RoHS Compliant • Number of Layers: 1-30 layer • Base Material: FR4, High Tg FR4, Halogen Free, SYL, Rogers, Aluminium • Copper Thickness: 1/3oz ~ 6oz • Boar
Technical Library | 2017-06-01 17:12:08.0
The corrosion of Nickel-Palladium-Gold (Ni-Pd-Au) finish terminals in humid environments is known to be reduced with the application of a conformal coating such as acrylic. Corrosion has a higher rate of occurrence around the terminal ‘knee’ of a surface mount component, which may be reduced with the application of conformal coatings. Although radio frequency (RF) plasma processing is generally known to enhance conformity of conformal coating to surfaces through ionic bombardment, the effect on the functionality of assembled printed circuit boards (PCB) is not as well known. The purpose of this study is to assess whether RF plasma processing can enhance the adhesive and coverage qualities of an acrylic conformal coating on PCBs, specifically on Ni-Pd-Au terminals with a knee, and if plasma processing has an effect on the electrical functionality of components and fully assembled PCB.
Technical Library | 2021-10-06 17:54:32.0
The corrosion of Nickel-Palladium-Gold (Ni-Pd-Au) finish terminals in humid environments is known to be reduced with the application of a conformal coating such as acrylic. Corrosion has a higher rate of occurrence around the terminal 'knee' of a surface mount component, which may be reduced with the application of conformal coatings. Although radio frequency (RF) plasma processing is generally known to enhance conformity of conformal coating to surfaces through ionic bombardment, the effect on the functionality of assembled printed circuit boards (PCB) is not as well known. The purpose of this study is to assess whether RF plasma processing can enhance the adhesive and coverage qualities of an acrylic conformal coating on PCBs
Double-Sided & Multi-Layer PCB Material: - FR-4 / Hi-Temp FR-4 / FR-5 / G10 / BT / Polyimide - Very Thin PCB: 0.004" 2L ~ 0.030" 8L - Thick Copper: 1/4 oz. ~ 11 oz. Process: - PTH - Blind/Buried/Segmented Via - Sequential Lamination - MicroVia Capa
